ESP32-C3-DevKitM-1 Development Board

Please inform me as soon as the product is available again.
₹ 1,439.00 *

Prices incl. GST

Out of Stock.

  • DFR0807
  • 0807
ESP32-C3-DevKitM-1 is an entry-level development board based on ESP32-C3-MINI-1, a module named...more
Product information "ESP32-C3-DevKitM-1 Development Board"

ESP32-C3-DevKitM-1 is an entry-level development board based on ESP32-C3-MINI-1, a module named for its small size. This board integrates complete Wi-Fi and Bluetooth LE functions.

Most of the I/O pins on the ESP32-C3-MINI-1 module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-C3-DevKitM-1 on a breadboard.

Description of Components:

ESP32-C3-DevKitM-1 Development Board

 

Key Component

Description

ESP32-C3-MINI-1

ESP32-C3-MINI-1 is a general-purpose Wi-Fi and Bluetooth LE combo module that comes with a PCB antenna. At the core of this module is ESP32-C3FN4, a chip that has an embedded flash of 4 MB. Since flash is packaged in the ESP32-C3FN4 chip, rather than integrated into the module, ESP32-C3-MINI-1 has a smaller package size.

5 V to 3.3 V LDO

Power regulator that converts a 5 V supply into a 3.3 V output.

5 V Power On LED

Turns on when the USB power is connected to the board.

I/O Connector

All available GPIO pins (except for the SPI bus for flash) are broken out to the pin headers on the board.

Boot Button

Download button. Holding down Boot and then pressing Reset initiates Firmware Download mode for downloading firmware through the serial port.

Micro-USB Port

USB interface. Power supply for the board as well as the communication interface between a computer and the ESP32-C3FN4 chip.

Reset Button

Press this button to restart the system.

USB to UART Bridge

Single USB-to-UART bridge chip provides transfer rates up to 3 Mbps.

RGB LED

Addressable RGB LED (WS2812), driven by GPIO8.

Pin Header:

ESP32-C3-DevKitM-1 Development Board

Specifications:

  • ESP32-C3FN4 embedded, 32-bit RISC-V single-core processor, up to 160 MHz
  • 384 KB ROM
  • 400 KB SRAM
  • 8 KB RTC SRAM
  • 4 MB SPI flash
  • Operating Voltage/Power supply: 3.0~3.6 V
  • Operating Temperature Range: –40~85°C

Documents:

Shipping List:

  • ESP32-C3-DevKitM-1 Development Board ×1
Related links to "ESP32-C3-DevKitM-1 Development Board"
Read, write and discuss reviews...more
Customer evaluation for "ESP32-C3-DevKitM-1 Development Board"
Write a review
Reviews will be activated after verification.

The fields marked with * are required.

Viewed