Prices incl. GST
Ready to ship today,
Delivery time appr. 1-3 workdays.
1 in stock
- Product Code: DG-410-296
- MPN: 410-296
The Digilent Pro MX7 is a microcontroller development board based on the Microchip® PIC32MX795F512L, a member of the 32-bit PIC32 microcontroller family. It is compatible with Digilent's line of peripheral modules (Pmod), and is suitable for use with the Microchip MPLAB® IDE tools. The Pro MX7 is also compatible for use with MPIDE.
The Pro MX7 is designed to be easy to use and suitable for use by anyone from beginners to advanced users for experimenting with embedded control and network communications application. A built-in programming/debugging circuit compatible with the Microchip MPLAB IDE is provided, so no additional hardware is required for use with MPLAB. The kit contains everything needed to start developing embedded applications using either the MPLAB IDE or the MPIDE.
The Pro MX7 provides 52 I/O pins that support a number of peripheral functions, such as UART, SPI, and I2C ports as well as five pulse-width modulated outputs and five external interrupt inputs. Its network and communications features also include a 10/100 Ethernet interface, Full Speed USB 2.0 OTG interface, and dual CAN network interfaces. Ten of the I/O pins can be used as analog inputs in addition to their use as digital inputs and outputs.
The Pro MX7 can be powered in various ways via USB, or using an external AC-DC power adapter.
Processor/IC: Microchip PIC32MX795F512L
- 6 x 12-pin Pmod ports
- 2 x USB ports
- 1 x USB UART port
- 1 x RJ45 Ethernet port
- 1 x SPI ports
- 2 x SPI/UART ports
- 2 x CAN ports
- 2 x I2C ports
Programming: Program using MPIDE or MPLAB IDE
80 MHz maximum operating speed
Four SPI, five I2C, and six UART serial interfaces
Two CAN network controllers, five compare/PWM outputs
Five 16-bit timer/counters
Five timer capture inputs
Two analog comparators
52 I/O pins
3.3V operating voltage
10 analog inputs
Two USB connectors
USB 2.0 compliant full-speed On-The-Go (OTG) controller with dedicated DMA channel
8 MHz oscillator
Six 12-pin Pmod ports
Three pushbuttons and four LEDs
Programmable with MPIDE and also MPLAB IDE
- Digilent Pro MX7
- Custom Digilent cardboard box with protective foam
- One USB A to micro-B cable