OAK-D S2 PoE Fixed Focus

OAK-D S2 PoE Fixed Focus
Please inform me as soon as the product is available again.
₹ 42,289.00 *

Prices incl. GST

Out of Stock.

  • Luxonis-A00585
  • Luxonis-A00585
Overview : The  OAK-D S2 PoE  is the  Series 2  version of the ...more
Product information "OAK-D S2 PoE Fixed Focus"

Overview :

The OAK-D S2 PoE is the Series 2 version of the OAK-D-PoE. The main difference is that the OAK-D S2 PoE has a smaller enclosure and is therefore lighter. It also has industrial M12 PoE connector (instead of RJ45) and additionally features M8 connector for IO connectivity; USB2 (D+, D-), camera IOs (FSIN, STROBE), power, and one auxiliary GPIO.
Looking for the Wide FOV OAK-D S2 PoE? You can find it here.
Hardware specifications : This OAK camera uses Power-over-Ethernet (PoE) for communication and power. It offers full 802.3af and Class 3 PoE compliance with 1000BASE-T speeds (1 Gbps). A PoE injector/switch is required to power the device.

Sensor specifications

Fixed-Focus (FF) : For the normal FOV version you can select either FF or AF color camera, more information here.

Camera Specs

Color camera

Stereo pair

Sensor

IMX378

OV9282

Shutter

rolling

global

FOV (D/H/V)

81°/69°/55°

89.5°/80°/55°

Resolution

12MP (4032x3040)

1MP (1280x800)

Focus

FF: 50cm - ∞

FF: 19.6cm - ∞

Max Framerate

60 FPS

120 FPS

Pixel size

1.55µm x 1.55µm

3µm x 3µm

Lens size

1/2.3 inch

1/4 inch

RVC2 inside

This OAK device is built on top of the RVC2. Main features:

4 TOPS of processing power (1.4 TOPS for AI)
Run any AI model, even custom architectured/built ones - models need to be converted.
Encoding: H.264, H.265, MJPEG - 4K/30FPS, 1080P/60FPS
Computer vision: warp/dewarp, resize, crop via ImageManip node, edge detectionfeature tracking. You can also run custom CV functions
Stereo depth perception with filtering, post-processingRGB-depth alignment, and high configurability
Object tracking: 2D and 3D tracking with ObjectTracker node

Auxiliary M8 connector : M8 aux connector has 8pin female A-coded connector. M12 ethernet has 8pin female X-coded connector.

../_images/m8-connector.jpeg

Pin

Function

Additional information

1

AUX GPIO 3V3

3V3 auxiliary GPIO. Pull this pin high with 10k resistor at startup for USB boot.

2

FSYNC ISO

Isolated Frame synchronization input signal for cameras

3

USB D+

USB 2.0 interface used as a host to control external devices. Could be used to connect to the device (eg. reflash), if USB boot is enabled (via GPIO 0).

4

USB D-

USB 2.0 interface used as a host to control external devices. Could be used to connect to the device (eg. reflash), if USB boot is enabled (via GPIO 0).

5

VBUSIN

This pin is used for sourcing 5V power to accessory devices connected to the M8 connector. If trying to boot the device in USB boot mode, this pin can also sink current.

6

Strobe ISO

Isolated Strobe output signal for cameras (Open Collector)

7

Isolated GND

Isolated ground for Strobe/FSYNC

8

GND

Ground.

Cameras also include an M8 connector cap for waterproofing in case the M8 connector wouldn’t be used.

../_images/m8-isolated-circiut.png

Dimensions and Weight :

Weight: 184g

../_images/dimensions2.png

Depth perception

This OAK camera has a baseline of 7.5cm - the distance between left and right stereo camera. Minimal and maximal depth perception depends on camera FOV, resolution, and baseline - more information here.

Min perceivable distance: ~20cm (400P, extended), ~35cm (400P OR 800P, extended), ~70cm (800P)
Max perceivable distance: ~35 meters

Extended means that StereoDepth node has Extended disparity mode enabled, more information here. Maximum perceivable distance calculation here.

Related links to "OAK-D S2 PoE Fixed Focus"
Read, write and discuss reviews...more
Customer evaluation for "OAK-D S2 PoE Fixed Focus"
Write a review
Reviews will be activated after verification.

The fields marked with * are required.

Viewed