Top seller
eINK click eINK click
₹ 6,199.00 *
Next Skywire click Next Skywire click
₹ 1,999.00 *
Riverdi click Riverdi click
₹ 949.00 *
Adapter click Adapter click
₹ 679.00 *
4D-display click 4D-display click
₹ 949.00 *
RadioStation click RadioStation click
₹ 2,629.00 *
2x20W Amp click 2x20W Amp click
₹ 2,209.00 *
BUZZ 2 click BUZZ 2 click
₹ 1,259.00 *
Mic click Mic click
₹ 949.00 *
GainAMP click GainAMP click
₹ 1,579.00 *
2x5W AMP click 2x5W AMP click
₹ 1,999.00 *
StereoAmp click StereoAmp click
₹ 2,519.00 *
Close filters
 
  •  
  •  
from to
 
114 From 114
No results were found for the filter!
Riverdi click
Riverdi click
Riverdi click is an adapter for connecting Riverdi TFT displays to a mikroBUS socket. The onboard zif20 connector allows you to interface between the target MCU and an FT8xx graphic controller on Riverdi displays. The click runs on...
₹ 949.00 *
eINK click
eINK click
eINK click is an adapter for connecting eINK displays, with a 24pin ribbon cable. The eINK display sold with the click can retain the image even when the power is off. The click board™ is designed to run on a 3.3V power supply. It...
₹ 6,199.00 *
Next Skywire click
Next Skywire click
Skywire™ click is an adapter click, which hosts NimbeLink/Skywire™ cellular modems (using stacking headers) to MikroElektronika development boards . It carries the MCP1826 low dropout regulator from Microchip. Skywire™ click is designed...
₹ 1,999.00 *
Adapter click
Adapter click
Adapter Click™ is a breakout board which simplifies connection of add-on boards with IDC10 headers to mikroBUS™ socket. There are two ways of establishing connection: using male or female IDC10 connectors. Both are provided with the...
₹ 679.00 *
4D-display click
4D-display click
TFT 4D - display click offers a high quality 30-pin ZIF FFC connector for display connection, as well as a 2-pole SMD terminal block for connecting an external power supply, for cases when the connected display demands more power than...
₹ 949.00 *
6LoWPAN T click
6LoWPAN T click
6LoWPAN T click carries the CC2520 2.4GHz RF transceiver. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI interface, with additional functionality provided by the following...
₹ 2,729.00 *
4G LTE-NA click (North America)
4G LTE-NA click (North America)
4G LTE-NA click carries the LARA-R204 multi-mode cellular module from u-blox. The board is designed to use 5V power supply. I/O voltage levels could be 3.3V or 5V. It communicates with the target microcontroller over UART interface, with...
₹ 12,079.00 *
LDC1000 click
LDC1000 click
Description LDC1000 click carries the world's first inductance-to-digital converter IC, along with a detachable sensor (an LC tank comprising a 36-turn PCB coil and a 100pF 1% NPO capacitor). The LDC1000 IC has a sub-micron...
₹ 3,679.00 *
Boost-INV 2 click
Boost-INV 2 click
Advanced switching control of the TPS65131 with a self-learning feedback correction characteristic allows high efficiency and less dissipation. Low output voltage ripple reduces EMI, allowing the converter to be used for sensitive...
₹ 3,049.00 *
114 From 114
Viewed