Mikromedia 3 for STM32F4 CAPACITIVE

Mikromedia 3 for STM32F4 CAPACITIVE
Please inform me as soon as the product is available again.
₹ 18,009.00 *

Prices incl. GST

Out of Stock.

  • MIKROE-3617
  • 3617
BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 3 for STM32F4...more
Product information "Mikromedia 3 for STM32F4 CAPACITIVE"

BUILD GREAT GUI IN NO TIME

mikromedia 3 back side

Rich with peripherals

Mikromedia 3 for STM32F4 CAPACITIVE is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much more expands its use beyond the multimedia. Two standardized 1x26 pin headers expose the available MCU pins to the user, adding another layer of expandability. By using mikromedia 3 shield, connectivity can be further expanded with several mikroBUS™ sockets, additional connectors, peripherals, and so on.

mikromedia 3 display graphic

Awesome graphics on MCU driven TFT

Mikromedia 3 for STM32F4 CAPACITIVE is a compact development board designed as a complete solution for the rapid development of multimedia and GUI-centric applications. By featuring a 3.5" TFT display with capacitive touch screen driven by the powerful graphics controller that can display the 24-bit color palette (16.7 million colors), along with a DSP-powered embedded sound CODEC IC, represents a perfect solution for any type of multimedia application.

mikromedia 5 audio

Develop-on & build-in the same board

Mikromedia 3 for STM32F4 CAPACITIVE is designed as the complete solution which can be implemented directly into any project, with no additional hardware modifications required. Four mounting holes at all four corners allow simple installation with mounting screws. For most applications, a nice stylish casing is all that is needed to turn the mikromedia 3 for STM32F4 CAPACITIVE development board into a fully functional, high-performance, feature-rich device.

At its core, there is a powerful 32-bit STM32F407VGT6 microcontroller, produced by STMicroelectronics, which provides sufficient processing power for the most demanding tasks, ensuring fluid graphical performance and glitch-free audio reproduction.

WHAT'S ON BOARD - BACK SIDE

mikromedia 5 back left side

Sound, connectivity & expandibility

Resource-demanding and complex audio processing tasks can be offloaded from the host MCU by utilizing a dedicated audio CODEC IC, labeled as VS1053B. This IC supports many different audio formats, commonly found on various digital audio devices.

This development board is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader, and much more expands its use beyond the multimedia.

mikromedia 3 back center

State of the art power supply, Display & Graphics controller

A high-quality 3.5" TFT true-color display with a capacitive touch panel is the most distinctive feature of the mikromedia 3. The display has a resolution of 320 by 240 pixels, and it can display up to 16.7M of colors. The display module is controlled by the SSD1963 graphics driver IC from Solomon Systech. This is a powerful graphics coprocessor, equipped with 1215KB of frame buffer memory. It also includes some advanced features such as the hardware accelerated display rotation, display mirroring, hardware windowing, dynamic backlight control, programmable color and brightness control, and more.

The Power Supply Unit (PSU) provides a clean and regulated power, necessary for a proper operation of the mikromedia 3 development board. It is equipped with two different power supply inputs, offering all the flexibility that mikromedia 3 needs.

mikromedia 3 back right side

More connectivity

The microSD card slot allows storing large amounts of data externally, on a microSD memory card. The microSD card detection circuit is also provided on the board.

The host MCU is equipped with the USB peripheral module, allowing simple USB connectivity.

WHAT'S ON BOARD - FRONT SIDE

mikromedia 3 display left

Additional sensors and other miscellaneous peripherals

An ambient light sensor (ALS) can be used for dimming the screen intensity in low-light conditions, allowing for the lower power consumption. It can also be used to detect the proximity and turn on the screen or increase its brightness when the user approaches.

The MCP9700A, an integrated low-power linear active thermistor allows measurement of the ambient temperature.

mikromedia 3 display center

Headers & On-Off switch

Most of the host MCU pins are routed to the two 1x26 pin headers, making them available for further connectivity. In addition to MCU pins, some additional peripheral pins are also routed to this header.

After a valid power supply source is connected mikromedia 3 can be powered ON. This can be done by a small switch at the right side of the board. By switching it ON, the PSU module will be enabled, and the power will be distributed throughout the board. A LED indicator labeled as PWR indicates that the mikromedia 3 is powered ON.

mikromedia 3 display right

Reset & connectors access

The board is equipped with the Reset button, which is located on the front side of the board. It is used to generate a LOW logic level on the microcontroller reset pin. The reset pin of the host MCU is also routed to the pin 1 of the 1x26 pin header, allowing an external signal to reset the device.

Mikromedia 3 for STM32F4 CAPACITIVE is packed in the protective box along with the relevant documentation. This box is very resistant to all kinds of damage and shock.

The package contains:

  • Damage resistant protective box
  • Mikromedia 3 for STM32F4 CAPACITIVE
  • SD card
  • Two 1x26 pin header
  • 2x5 right angle header
  • USB cable with adapter
  • Board Schematic
  • User Manual
Related links to "Mikromedia 3 for STM32F4 CAPACITIVE"
Read, write and discuss reviews...more
Customer evaluation for "Mikromedia 3 for STM32F4 CAPACITIVE"
Write a review
Reviews will be activated after verification.

The fields marked with * are required.

Viewed