Prices incl. GST
Out of Stock.
- Product Code: NCD-PR55-20A
- MPN: PR55-20A
Industrial IoT Wireless Predictive Maintenance Sensor
Introducing NCD’s Long Range Industrial IoT Wireless Predictive Maintenance Sensor, boasting up to a 2 Mile range using a wireless mesh networking architecture. This IoT Wireless Predictive Maintenance Sensor consists of 4 of our most popular sensors in a single package to help control costs in most predictive maintenance applications. This sensor includes a Vibration Sensor, Thermocouple, 100 Amp AC Split Core Current Sensor, and Ambient Air Temperature Sensor. This IoT Wireless Predictive Maintenance Sensor Samples vibration, RMS current and temperature data and sends after a fixed user-designed interval over the wireless network. This device comes with a 1.25 meter long split core current sensor, 1 Meter Long Vibration Probe (which also measure air temperature) and 1 Meter Long thermocouple probe which makes installation easy.
3-Axis Vibration Sensor Characteristics — During Power-Up, this vibration sensor learns “normal” base-line vibration from the monitored device. This base-line vibration is subtracted from regular sampled vibration readings to improve relevant vibration data. Ideally, the monitored device should be off while the sensor is learning. Once the sensor stabilizes and starts sending data, the device/machinery being monitored can be powered on. This Industrial IoT wireless vibration sensor samples 3-axis of Vibration data for 500ms and then calculates RMS, Maximum, and Minimum vibration readings. This sensor combines these data with temperature data in a data packet, and transmits the result to modems and gateways within wireless range. Once transmission is complete, the vibration sensor goes back to sleep, thus minimizing power consumption.
Thermocouple Sensor Characteristics — Long Range Industrial IoT Wireless Predictive Maintenance Sensor is capable of measuring extreme high and low temperatures. This wireless thermocouple includes one 5SRTC-TT-K-24-36 K-Type thermocouple probe from Omega.com with a 1m, 24 AWG connection cable, rated for temperature measurement applications up to 260°C (500°F) with an accuracy of ±2.2°C. This wireless thermocouple device comes with K-Type connector, which can be used to connect higher temperature range thermocouple if needed. This sensor has in built hot and cold junction to provide highly accurate readings. This wireless IoT sensor is an ideal product for high temperature measurements, industrial boiler temperature measurements, liquid temperature measurement, and temperature monitoring of food storage units.
Powered by just 4 AA batteries and an operational lifetime of 500,000 wireless transmissions, a 10 years battery life can be expected depending on environmental conditions and the data transmission interval.
Specification
- Industrial Grade IoT Wireless Predictive Maintenance Sensor
- AC Current Range up to 100A RMS Measurement
- 3-axis Vibration Sensor with RMS, MAX and MIN
- Calculates g Vibration Data Across ±16g Range with Low Pass Filter
- Vibration Frequency Range (Bandwidth) up to 408 Hz Samples up to 952Hz
- High Grade K type thermocouple Connector and Probe
- Thermocouple Rating of 260°C (500°F) with ±2.2°C Accuracy
- Ideal Sensor for Machine Health Monitoring
- Wall-Mounted or Magnet Mounted IP65 Rated Enclosure
- 2 Mile Line-of-Sight Range with On-Board Antenna
- Superior LOS Range of up to 28 Miles with High-Gain Antennas
- Interface to Raspberry Pi, Microsoft® Azure®, Losant, and More
- Send IoT Predictive Maintenance Data to Amazon AWS and Temboo
- Example Software for Visual Studio and LabVIEW®
- Wireless Mesh Networking using DigiMesh®
- Open Communication Protocol for Easy Software Integration
- Power-Efficient Sleep Mode, Up to 10 Year Battery Life
- User Configurable Sleep Duration
- Validates and Retries Lost Communication Packets
IoT Security
We take IoT security very seriously, which is why we encrypt every IoT sensor, gateway, modem, and device in the NCD Enterprise product line. Encryption is much easier to manage than you might expect, as the encryption does not get in the way of using the device. We include a standard 128-Bit AES Encryption key with every device or we can help you integrate a new encryption key into all of your devices. All hardware devices must use the same encryption key. Once the keys are set, the hardware manages the rest for you, 100% in the background.
Wireless Range and Protocol
NCD long-range wireless IoT sensors use the DigiMesh® protocol from Digi.com. DigiMesh® was designed by THE industrial leader in secure wireless communications for industrial applications. DigiMesh® automatically hops data from gateway to gateway until it arrives at the desired destination. NCD IoT sensors are capable of a 2-Mile line-of-site communication distance with the included antennas and up to 28-mile range when using high-gain antennas.
Your IoT Sensor Data Belongs to You!
Your data belongs to YOU and it’s up to you to decide where you want your IoT sensor data to arrive. Don’t be bogged down by the limitations of proprietary cloud solutions, post the data where you need it most. We offer an open communications protocol so you can integrate NCD wireless transmitters into your own software. This allows integration of NCD IoT sensors into any control system or gateway you could ever imagine. Send data to a PC, Mac, or Linux computer, or a Raspberry Pi using NCD modems. Send data to popular cloud platforms such as Microsoft® Azure® IoT, Losant, and MQTT using NCD Micro Gateways. We can also help get data from NCD wireless IoT sensors to embedded platforms such as Arduino. We also offer sample code for Microsoft® Visual Studio, Node-RED, LabVIEW®, and Python. Our documentation fully breaks down the packet structure, so integration into other languages is possible. We may even be able to help, so please feel free to contact us if you are working with a platform not mentioned here.
The long range, price, accuracy, battery life and security features of NCD Long Range Industrial IoT Wireless Predictive Maintenance Sensor makes it an affordable choice which exceeds the requirements for most of the industrial as well as consumer market applications.
Note: To measure the low current (below 1.5 Amps) pass the wire through the sensor 5 times and divide the current readings by 5.