Prices incl. GST
Ready to ship today,
Delivery time appr. 1-3 workdays.
1 in stock
- Product Code: Phidgets-3052_1
- MPN: 3052_1
Rated for 28VAC/2.5amp or 40VDC/2.5amp switching, this SSR is controlled by a digital output.
Solid State Relays, or SSRs, are devices designed to operate like standard relays but without mechanical motion. By simply providing a small voltage to the control side of the circuit, you can open or close a higher powered circuit on the load side.
The SSR Board is safe to use with sensitive control devices like microprocessors, and will not damage a Phidget device or your PC. Optoisolation between the control inputs and outputs of the SSR in the form of an LED paired with a set of optically-controlled MOSFETs provides protection from output to input. An on-board diode across the relay output protects the board from static electricity and surges from inductive loads.
|Controlled By||Digital Output (5V)|
|Relay Output Type||MOSFET|
|Dielectric Strength||1.5 kV AC|
|Control Voltage Min||3 V DC|
|Control Voltage Max||30 V DC|
|Control Current||10 mA|
|Load Voltage Max (DC)||40 V DC|
|Load Voltage Max (AC)||28 V AC|
|Load Current Max (AC)||2.5 A|
|Load Current Max (DC)||2.5 A|
|Turn-on Time Max||5 ms|
|Turn-off Time Max||0.2 ms|
|Contact Resistance Max||50 mΩ|
|Recommended Wire Size (Load)||16 - 26 AWG|
|Recommended Wire Size (Control)||16 - 26 AWG|
|Operating Temperature Min||-40 °C|
|Operating Temperature Max||85 °C|