Please inform me as soon as the product is available again.
₹ 4,399.00 *
Prices incl. GST
Out of Stock.
- Product Code: Phidgets-STC1003_0
- MPN: STC1003_0
The STC1003 allows you to control a bipolar stepper motor (up to 4A). This Phidget connects to...more
Product information "4A Stepper Phidget"
The STC1003 allows you to control a bipolar stepper motor (up to 4A). This Phidget connects to your computer through a VINT Hub.
Features:
- Control position, velocity, and acceleration
- Current Control - Set the current limit and holding current separately
- Two Drive Modes - Step mode specifies a target position in 1/16th steps. Run mode rotates continuously at a specified velocity.
Technical Details:
- Isolation - The VINT hub and the computer will be protected if anything goes wrong with your circuit
- Polarity Protection - The device will not turn on and will not be damaged if the power supply is connected backward
- Overcurrent Protection - Onboard fuse to protect the controller in an over-current event
- Overheating Protection - A built-in heatsink prevents overheating
- Failsafe Protection - Set the device to turn off if automatically your program becomes unresponsive
- Power Saving - Separate control over the current limit and the holding current limit
Product Specifications
| Board Properties | |
|---|---|
| Controlled By | VINT |
| Controller Properties | |
| Motor Type | Bipolar Stepper |
| Number of Motor Ports | 1 |
| Motor Position Resolution | 1/16 Step (40-Bit Signed) |
| Position Max | ± 1E+15 1/16 steps |
| Stepper Velocity Resolution | 1 1/16 steps/sec |
| Stepper Velocity Max | 115000 1/16 steps/sec |
| Stepper Acceleration Resolution | 1 1/16 steps/sec² |
| Stepper Acceleration Min | 2 1/16 steps/sec² |
| Stepper Acceleration Max | 1E+07 1/16 steps/sec² |
| Sampling Interval Min | 100 ms/sample |
| Sampling Interval Max | 60 s/sample |
| Electrical Properties | |
| Available Current per Coil Max | 4 A |
| Supply Voltage Min | 10 V DC |
| Supply Voltage Max | 30 V DC |
| Current Consumption Min (VINT Port) | 500 μA |
| Current Consumption Max (VINT Port) | 1 mA |
| Quiescent Power Consumption Max | 200 mW |
| Replacement Fuse | 5A Slow Blow Blade Type, Regular or Micro |
| Physical Properties | |
| Recommended Wire Size | 16 - 26 AWG |
| Operating Temperature Min | -20 °C |
| Operating Temperature Max | 85 °C |
| Customs Information | |
| Canadian HS Export Code | 8471.80.00 |
| American HTS Import Code | 8471.80.40.00 |
| Country of Origin | CN (China) |
Related links to "4A Stepper Phidget"
Viewed