5:1 Micro Metal Gearmotor HP 6V with Extended Motor Shaft

Please inform me as soon as the product is available again.
₹ 1,679.00 *

Prices incl. GST

Out of Stock.

  • Pololu-2210
  • 2210
This gearmotor is a miniature  high-power, 6 V  brushed DC motor with a ...more
Product information "5:1 Micro Metal Gearmotor HP 6V with Extended Motor Shaft"

This gearmotor is a miniature high-power, 6 V brushed DC motor with a 4.995:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.

Key specifications:

voltageno-load performancestall extrapolation
6 V 6000 RPM, 70 mA 0.11 kg⋅cm (1.5 oz⋅in), 1.6 A

These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes. The 6 V and 12 V HPCB motors offer the same performance at their respective nominal voltages, just with the 12 V motor drawing half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical except for their brushes, which only affect the lifetime of the motor.

The HPCB versions (shown on the left in the picture below) can be differentiated from versions with precious metal brushes (shown on the right) by their copper-colored terminals. Note that the HPCB terminals are 0.5 mm wider than those on the other micro metal gearmotor versions (2 mm vs. 1.5 mm), and they are about 1 mm closer together (6 mm vs. 7 mm).

Details for item #2210

Exact gear ratio: 27×3720×10=4.995:1">27×3720×10=4.995:127×3720×10=4.995:1

This gearmotor is a miniature high-power, 6 V brushed DC motor with a 4.995:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.

Dimensions

Size: 10 × 12 × 26 mm1
Weight: 9.5 g
Shaft diameter: 3 mm2

General specifications

Gear ratio: 4.995:1
No-load speed @ 6V: 6000 rpm
No-load current @ 6V: 0.07 A
Stall current @ 6V: 1.6 A
Stall torque @ 6V: 0.11 kg·cm
Extended motor shaft?: Y
Motor type: 1.6A stall @ 6V (HP 6V)

Notes:

1.  Output shafts add 14 mm to the 26 mm length.

2.  D shaft.

Related links to "5:1 Micro Metal Gearmotor HP 6V with Extended Motor Shaft"
Read, write and discuss reviews...more
Customer evaluation for "5:1 Micro Metal Gearmotor HP 6V with Extended Motor Shaft"
Write a review
Reviews will be activated after verification.

The fields marked with * are required.

Viewed