640x384, 7.5inch E-Ink display HAT for Raspberry Pi, three-color

This product is currently not available.
Please inform me as soon as the product is available again.
₹ 5,639.00 *

Prices incl. GST

Out of Stock.

  • Waveshare-13505
  • 13505
640x384, 7.5inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface. This is an...more
Product information "640x384, 7.5inch E-Ink display HAT for Raspberry Pi, three-color"

640x384, 7.5inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface.

This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W
  • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications

  • Operating voltage: 3.3V~5V
  • Interface: SPI
  • Outline dimension: 170.2mm × 111.2mm
  • Display size: 163.2mm × 97.92mm
  • Dot pitch: 0.255 × 0.255
  • Resolution: 640 × 384
  • Display color: red, black, white
  • Grey level: 2
  • Full refresh time: 16s
  • Refresh power: 38mW(typ.)
  • Standby power: <0.017mW
  • Viewing angle: >170°

Interface

SymbolDescription
VCC 3.3V~5V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, low active

PACKAGE CONTENT

  1. 7.5inch e-Paper (B) x1
  2. e-Paper Driver HAT x1
  3. RPi screws pack (2pcs) x1
  4. PH2.0 20cm 8Pin x1

Dimensions

7.5inch e-Paper HAT dimensions

 

Related links to "640x384, 7.5inch E-Ink display HAT for Raspberry Pi, three-color"
Read, write and discuss reviews...more
Customer evaluation for "640x384, 7.5inch E-Ink display HAT for Raspberry Pi, three-color"
Write a review
Reviews will be activated after verification.

The fields marked with * are required.

Viewed