No results were found for the filter!
Flapper Nimble+ Starter Kit
The Flapper Nimble+ is the world’s first commercially available tailless flapping wing robot, now exclusively available via our webstore! Developed and manufactured by Flapper Drones, the Nimble+ is a development platform focused on...
₹ 2,19,999.00 *
7 mm DC-motor
Spare Crazyflie 2.X brushed coreless DC-motor. Mechanical specifications: Diameter: 7.0 mm Length: 16.0 mm Shaft length: 3.5 mm Shaft diameter: 0.8 mm Weight: 2.7 g Wire length: 32.0 mm Molex Picoblade 2P connector Electrical...
₹ 439.00 *
Battery holder deck
Spare battery holder deck for Crazyflie 2.X. Mechanical specifications: Weight: 0.4g Size (WxHxD): 28x28x4mm Package contents: 1 x Battery holder deck Ressources: Datasheet
₹ 549.00 *
Male deck connector
This product is intended to be used together with the Crazyflie 2.X expansion deck system. Package contents 4 x short male expansion header (8mm long) 4 x long male expansion header (14mm long) Resources Datasheet
₹ 279.00 *
AI-deck monocrome camera module
This is a monochrome camera module to exchange the color camera module (Bayer RGB) for, which comes with the AI-deck . This is handy if you rather work with greayscale images. The Bayer RGB can be converted to gray-scale as well but then...
₹ 2,199.00 *
micro-USB cable (48cm)
Standard micro USB cable. Features: USB A male connector USB Micro B male connector 48cm in length (~19 inches)
₹ 549.00 *
6 mm DC-motor
Spare 6x15 mm brushed coreless DC motor for the Crazyflie Nano Quadcopter (Crazyflie 1.0). Electrical specifications: Kv: 12000 rpm/V Rated voltage: 4.2 V Rated current: 810 mA Mechanical specifications: Diameter: 6 mm Length: 15 mm...
₹ 329.00 *
Crazyflie Nano Quadcopter - 4 x spare motor mount
Spare motor mount for the Crazyflie Nano Quadcopter. Specifications: Weight: ~0.21g Plastic: PP Package Contents: 4 x Motor mount Resources: Datasheet
₹ 549.00 *
250mAh LiPo battery
Make sure to get the maximum amount of flight-time from your Crazyflie 2.X using this spare battery. Features: Operating Temperature: 0~45°C (Charging) / 0~60°C (Discharging) Connector: Molex 51005-2P (Pin 1 positive) Package Contents: 1...
₹ 659.00 *
500mA LiPo USB charger
Use the Bitcraze battery charger to always have your spare batteries full to maximize your flight time. If you’re a bit handy with a soldering iron you can even solder multiple chargers together for multi-battery charging. For more...
₹ 659.00 *
Getting started bundle
The "Getting started bundle" has everything you need to dive into the Crazyflie platform to start exploring flying robotics. Aside from the Crazyflie 2.1 this bundle also includes the Crazyradio PA, which enabled connection to a computer...
₹ 26,399.00 *
Lighthouse explorer bundle
With the Lighthouse explorer bundle you'll get everything you need to try out the Lighthouse positioning system . The system is used for on-board positioning, which gives a tracking volume of up to 5x5x2 meters with sub-millimetre jitter...
₹ 89,999.00 *
Lighthouse V2 BigQuad deck Roadrunner Getting started STEM drone micro-USB cable 250mAh LiPo Crazyflie Nano AI-Deck Color Reflective Breakout deck Happy hacker Lighthouse Flapper Nimble Lighthouse 500mA LiPo USB Female Deck Lighthouse The artist Crazyflie Bolt Loco explorer Motion capture Z-ranger deck Multi-ranger 7 mm DC-motor 6 mm DC-motor Loco AI-deck Crazyflie 2.X 4 Male long deck Buzzer deck Z-ranger deck LED-ring deck 250mAh LiPo Loco Loco Swarm Propeller pack 4 x 7 mm AI-deck crazyflie V2.1 Spare part Male deck Active marker AI-Deck 1.1 Prototyping Debug adapter