Top seller
No results were found for the filter!
NEW
BLDC Motor with Driver CubeMars AK80-64 KV80 – Upgrade Version NOTE: R-Link (A serial port module that works with AK motors) is not required, but it can help debug AK motors. We recommend R-Link to customers using AK motors for the first...
₹ 94,789.00 *
NEW
The AK80-8 planetary gear motor offers reduction ratio of 8:1, enabling it to adapt to various application scenarios and provide a wider range of motion control capabilities for your robots. Additionally, we take pride in our dual...
₹ 54,569.00 *
NEW
The T-Motor Brushless Motor AK70-10 is a highly integrated and high-torque module. The module weighs only 521 g, thin as 50.2 mm combined with efficiency and dynamic. This motor combines with a planetary gear solution and uses a 10:1...
₹ 47,769.00 *
NEW
Easy to control and compact in size Integrated with encoder and driver Professionally applied for exoskeleton use The Cubemars AK60 6V1.1 KV80 Brushless DC Motor w/ Encoder & Driver for Robot is an ultra-light, high-integrated dynamic...
₹ 28,619.00 *
NEW
This is a T-motor CubeMars AK10-9 V2.0 100KV Brushless DC Actuator Robot Joint Motor. Features: Highly Integrated & High Torque Module Reducer and Controller in One Large Torque Applied to Exoskeleton, Quadruped Robotic Dog Easy...
₹ 76,499.00 *
Xilinx Kria KR260 Robotics Starter Kit is a development platform based on the Kria K26 SOM and built for robotics and industrial applications. It is complete with high-performance interfaces and native ROS 2 support for ease of...
₹ 40,999.00 *
Features HN11-I101 is the standard idler bearing set for Dynamixel XL 430 series. This idler bearing is connected to the opposite side of the output shaft of Dynamixel X, and can be used to assemble the hinge frame on it. Patented hollow...
₹ 749.00 *
Features The OpenRB-150 is a new open-source Arduino compatible embedded controller. The controller has the same pinout and form factor as the Arduino MKR, and supports programming using the Arduino IDE. It also features 4 dedicated...
₹ 2,899.00 *
OVERVIEW Out-of-the-Box Ready for Robotics and Industrial Application Development OPTIMIZED FOR KRIA K26 SOM 2x 240-pin connectors All SOM I/O available for sensor & network connectivity HIGH PERFORMANCE INDUSTRIAL VISION SLVS-EC Rx 4x...
₹ 40,999.00 *
The LoCoBot is an ROS research rover for mapping, navigation and manipulation (optional) that enables researchers, educators and students alike to focus on high level code development instead of hardware and building out lower level...
₹ 7,59,999.00 *
Features : Side frame set for XW540 series Can be used by assembling on the top, bottom side of the DYNAMIXEL. Package Components : FR13-S105K 1 Flat head Wrench Bolt FWB M2.5x17 6 Wrench Bolt WB M2.5x5 8 Wrench Bolt WB M2.5x4 10...
₹ 6,639.00 *
Features : Optional frame used for DYNAMIXEL Has high strength due to aluminum material. Package Components : FR07-S101 1 Wrench Bolt WB M2.5x6 8 Nut M2.5 4
₹ 1,589.00 *
BIOLOID STEM Wrench Bolt M2 TURTLEBOT3 203MM Stainless 3WD 48mm Omni LoCoBot WX250 Interbotix DYNAMIXEL Robot Cable-X4P Xilinx Kria DYNAMIXEL DYNAMIXEL PRO 500mm 3 Pin 3WD 100mm Omni Kria KR260 DYNAMIXEL SMPS 12V 5A DYNAMIXEL PRO DYNAMIXEL PRO 38mm 1.5 inch Mecanum Omni DYNAMIXEL 203MM Aluminum Spindle SI-48 K S2 Bolt PHS 5 inch 127mm OpenRB-150 ViperX 250 HN11-I101 Set DYNAMIXEL PRO DYNAMIXEL PRO TURTLEBOT3 ReactorX 200 DYNAMIXEL 48mm Aluminum DYNAMIXEL 6 inch 152mm DYNAMIXEL 203MM Stainless PhantomX Metal TurtleBot4 Spindle SI-15 K DYNAMIXEL HN05-N102 Idler New Large TurtleBot4
Viewed