Close filters
 
  •  
  •  
from to
1 From 63
No results were found for the filter!
NEW
10:1 Micro Metal Gearmotor HPCB 6V with 12 CPR Encoder, Side Connector
10:1 Micro Metal Gearmotor HPCB 6V with 12 CPR...
Our Micro Metal Gearmotor family consists of tiny brushed DC metal gearmotors with nitride-hardened martensitic stainless steel gears in a wide range of gear ratios, motor windings, brushes, and encoder configurations: Micro Metal...
₹ 3,129.00 *
NEW
ACHS-7122 Current Sensor Carrier -20A to +20A
ACHS-7122 Current Sensor Carrier -20A to +20A
This current sensor is a carrier board or breakout board for Broadcom’s ACHS-7121/7122/7123/7124/7125 Hall effect-based, electrically isolated current sensors; we therefore recommend careful reading of the ACHS-7121/7122/7123 datasheet...
₹ 489.00 *
Pololu Digital Distance Sensor 100cm
Pololu Digital Distance Sensor 100cm
This compact sensor is a great way to quickly detect the presence of nearby objects. As long as the sensor is enabled, it takes continuous distance measurements and uses a single digital output to indicate if it detects an object within...
₹ 2,549.00 *
Pololu Universal Aluminum Mounting Hub for 6mm Shaft, M3 Holes (2-Pack)
Pololu Universal Aluminum Mounting Hub for 6mm...
These universal mounting hubs are designed to work with most 6 mm diameter shafts , including round shafts and “D” shafts. Each of the two included hubs has six mounting holes for M3 screws (not included), letting you mount custom wheels...
₹ 1,149.00 *
0.100" (2.54 mm) Shorting Block: Red, Top Closed
0.100" (2.54 mm) Shorting Block: Red, Top Closed
These shorting blocks make great removable jumpers and fit standard 0.1" male header pins. 0.100" (2.54 mm) shorting blocks of assorted colors on a 0.1" header strip.
₹ 25.00 *
0.100" (2.54 mm) Shorting Block: Yellow, Top Closed
0.100" (2.54 mm) Shorting Block: Yellow, Top...
These shorting blocks make great removable jumpers and fit standard 0.1" male header pins. 0.100" (2.54 mm) shorting blocks of assorted colors on a 0.1" header strip.
₹ 25.00 *
0.100" (2.54 mm) Shorting Block: Black, Top Closed
0.100" (2.54 mm) Shorting Block: Black, Top Closed
These shorting blocks make great removable jumpers and fit standard 0.1" male header pins. 0.100" (2.54 mm) shorting blocks of assorted colors on a 0.1" header strip.
₹ 25.00 *
0.100" (2.54 mm) Shorting Block: Blue, Top Closed
0.100" (2.54 mm) Shorting Block: Blue, Top Closed
These shorting blocks make great removable jumpers and fit standard 0.1" male header pins. 0.100" (2.54 mm) shorting blocks of assorted colors on a 0.1" header strip.
₹ 25.00 *
0.100" (2.54 mm) Female Header: 1x2-Pin, Right-Angle
0.100" (2.54 mm) Female Header: 1x2-Pin,...
These 0.1" female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs. The standard spacing is the same as on most solderless breadboards and matches 0.1" male header strips . Our...
₹ 49.00 *
DRV8876 Single Brushed DC Motor Driver Carrier
DRV8876 Single Brushed DC Motor Driver Carrier
This product is a carrier board for Texas Instruments’ DRV887x family of motor drivers; we therefore recommend careful reading of the corresponding driver’s datasheet before using this product. Three pin-compatible versions are available...
₹ 699.00 *
AltIMU-10 v6 Gyro, Accelerometer, Compass, and Altimeter (LSM6DSO, LIS3MDL, and LPS22DF Carrier)
AltIMU-10 v6 Gyro, Accelerometer, Compass, and...
The Pololu AltIMU-10 v6 is a compact (1.0″ × 0.5″) board that combines ST’s LSM6DSO 3-axis gyroscope and 3-axis accelerometer, LIS3MDL 3-axis magnetometer, and LPS22DF digital barometer to form an inertial measurement unit (IMU) and...
₹ 2,999.00 *
MinIMU-9 v6 Gyro, Accelerometer, and Compass (LSM6DSO and LIS3MDL Carrier)
MinIMU-9 v6 Gyro, Accelerometer, and Compass...
The Pololu MinIMU-9 v6 is a compact (0.8″ × 0.5″) board that combines ST’s LSM6DSO 3-axis gyroscope and 3-axis accelerometer and LIS3MDL 3-axis magnetometer to form an inertial measurement unit (IMU); we therefore recommend careful...
₹ 2,249.00 *
1 From 63
Viewed