Top seller
No results were found for the filter!
This Interbotix Lab Custom Frame is great for building robots from the -64 and -106 series DYNAMIXEL robot servos. For -106 servos, the frame will fit perfectly onto the servo. Each frame comes with two small spacer and longer bolts for...
₹ 2,629.00 *
Easily link your project to a LiPo/Li-ion battery with the Battery Wiring Harness ! This harness is the same one we use in our Hexapod and Quadruped kits. Just attach the male Dean connector to any of our LiPo/Li-ion Batteries and the...
₹ 999.00 *
The BIOLOID Compatible Metal F4 Bracket is a aluminum replacement for the standard BIOLOID F4 bracket . 4 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the...
₹ 559.00 *
The BIOLOID Compatible Metal F4 Bracket is an aluminum replacement for the standard BIOLOID F4 bracket . 12 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the...
₹ 559.00 *
The BIOLOID Compatible Metal F3 Bracket is an aluminum replacement for the standard BIOLOID F3 bracket . 4 tapped holes on the top of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the...
₹ 559.00 *
The BIOLOID Compatible Metal F2 Bracket is an aluminum replacement for the standard BIOLOID F2 bracket . 4 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. Compatible DYNAMIXEL Servos AX-12A...
₹ 559.00 *
The BIOLOID Compatible Metal F1 Bracket is an aluminum replacement for the standard BIOLOID F1 bracket . 4 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the...
₹ 559.00 *
The ArbotiX Commander v2.0 is an Arduino compatible, open-source XBEE-wireless hand-held controller built specifically for controlling ArbotiX/NUKE powered walking robots (but it can be interfaced to virtually any microcontroller or PC)....
₹ 6,999.00 *
The 6 Port AX/MX Power Hub is a must have accessory for any DYNAMIXEL user. This little board is a Bioloid 6 Port Hub and a SMPS adaptor all in one! The DYNAMIXEL communication bus allows you to daisy chain multile servos, making wiring...
₹ 899.00 *
It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for,...
₹ 1,669.00 *
It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for,...
₹ 1,559.00 *
The ReactorX 150 Robot Arm belongs to a new family of arms from Interbotix featuring the DYNAMIXEL X-Series Smart Servo Motors. The X-Series actuators offer higher torque, more efficient heat dissipation and better durability all at a...
₹ 1,58,999.00 *
PhantomX Pan WidowX Robot PhantomX PincherX 100 PhantomX RobotGeek PhantomX PincherX 150 WidowXL Robot Interbotix WidowX MX-28 WidowX MX-28 WidowX Robot PhantomX Robot 6 Port AX MX 250mm 3 Pin WidowX 200 WidowX 250 ArbotiX PhantomX PhantomX 3 Pin DYNAMIXEL ScorpionX MX-64 WidowX MX-28 PhantomX Pan ReactorX 150 Robot DC PhantomX Metal PhantomX PhantomX Robot WidowXL Robot Interbotix ScorpionX MX-64 ViperX 300 PhantomX WidowX Robot PhantomX ViperX 250 PhantomX Robot 350mm 3 Pin PhantomX AX Single Wheel ScorpionX MX-64 VisionX - SR300 PhantomX ReactorX 200
Viewed