Top seller
No results were found for the filter!
ScorpionX MX-64 Pan Tilt
The WidowX Pan Tilt kit is a mid level pan tilt kit using the wildly popular MX-64 DYNAMIXEL smart servos. With a resolution of 0.088°, rotation range of 360°, stall torque of 74 kg·cm, and speed of 78rpm you get tremendous resolution...
₹ 78,999.00 *
MX-64/106 Custom X-Long Bracket Set
This Interbotix Lab Custom Frame is great for building robots from the -64 and -106 series DYNAMIXEL robot servos. For -106 servos, the frame will fit perfectly onto the servo. Each frame comes with two small spacer and longer bolts for...
₹ 2,629.00 *
LiPo/Li-ion Battery Wiring Harness
Easily link your project to a LiPo/Li-ion battery with the Battery Wiring Harness ! This harness is the same one we use in our Hexapod and Quadruped kits. Just attach the male Dean connector to any of our LiPo/Li-ion Batteries and the...
₹ 999.00 *
BIOLOID AX Compatible Metal F5 Bracket
The BIOLOID Compatible Metal F4 Bracket is a aluminum replacement for the standard BIOLOID F4 bracket . 4 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the...
₹ 559.00 *
BIOLOID AX Compatible Metal F4 Bracket
The BIOLOID Compatible Metal F4 Bracket is an aluminum replacement for the standard BIOLOID F4 bracket . 12 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the...
₹ 559.00 *
BIOLOID AX Compatible Metal F3 Bracket
The BIOLOID Compatible Metal F3 Bracket is an aluminum replacement for the standard BIOLOID F3 bracket . 4 tapped holes on the top of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the...
₹ 559.00 *
BIOLOID AX Compatible Metal F2 Bracket
The BIOLOID Compatible Metal F2 Bracket is an aluminum replacement for the standard BIOLOID F2 bracket . 4 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. Compatible DYNAMIXEL Servos AX-12A...
₹ 559.00 *
BIOLOID AX Compatible Metal F1 Bracket
The BIOLOID Compatible Metal F1 Bracket is an aluminum replacement for the standard BIOLOID F1 bracket . 4 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the...
₹ 559.00 *
ArbotiX Commander v2.0 Kit
The ArbotiX Commander v2.0 is an Arduino compatible, open-source XBEE-wireless hand-held controller built specifically for controlling ArbotiX/NUKE powered walking robots (but it can be interfaced to virtually any microcontroller or PC)....
₹ 6,999.00 *
6 Port AX/MX Power Hub
The 6 Port AX/MX Power Hub is a must have accessory for any DYNAMIXEL user. This little board is a Bioloid 6 Port Hub and a SMPS adaptor all in one! The DYNAMIXEL communication bus allows you to daisy chain multile servos, making wiring...
₹ 899.00 *
250mm 3 Pin DYNAMIXEL Compatible Cables - 10 Pack
It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for,...
₹ 1,669.00 *
200mm 3 Pin DYNAMIXEL Compatible Cables -10 Pack
It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for,...
₹ 1,559.00 *
PhantomX Metal BIOLOID AX PincherX 100 MX-64 106 PincherX 150 500mm 3 Pin WidowX 250 ScorpionX MX-64 ViperX 250 BIOLOID AX ArbotiX BIOLOID AX 100mm 3 Pin PhantomX ReactorX 200 WidowX 200 6 Port AX MX WidowX MX-28 BIOLOID AX PhantomX BIOLOID AX Interbotix MX-64 106 ReactorX 150 350mm 3 Pin ViperX 300 250mm 3 Pin LoCoBot WX250 Interbotix 200mm 3 Pin LiPo Li-ion WidowX MX-28 PhantomX 3 Pin DYNAMIXEL
Viewed