Prices incl. GST
Out of Stock.
- Product Code: MIKROE-456
- MPN: MIKROE-456
The BIGAVR6 development system supports 64- and 100-pin AVR microcontrollers. It comes with the ATMEGA128 microcontroller. The system features a USB 2.0 programmer and many peripheral modules such as touch panel controller, CAN, RTC etc.
On-board USB 2.0 programmer. AVRprog2 doesn't use bootloader or any similar software for programming. The whole AVR memory and all pins are available to you. This is a fast USB AVR InSystem programmer ideal for your future projects. Our latest AVRprog2 Programmer is driven and powered by a single USB port on a PC. No additional AC power adapter is needed. The programmer is recognized by Windows, which simplifies the driver installation. The programmer board is specifically designed for In-Circuit Serial Programming (ICSP). The External Programmer and JTAG can be connected and used with the BIGAVR6 development system.
MMC/SD, EEPROM, Temperature sensors
MMC/SD card slot enables you to use MMC/SD memory cards easily. With Serial EEPROM 24AA01 you can store up to 1Kbit of data. Temperature Sensor DS1820 measures temperature from -55°C to 125°C. It is connected to the system via 3-pin socket. Board also features Real-Time Clock (RTC) DS1307 with a battery supply.
Displays and Touch screen
Graphic LCD 128x64 and LCD 2x16 can be easily connected via the on-board connectors. Board also features a Touch Screen controller.
Communication and Interfaces
RS-232 communication is enabled via two DB9 connectors and MAX232 level converters. USB connector and CAN transceiver MCP2551 are provided on-board as well.
PORTs, buttons and LEDs
86 push buttons and 86 LEDs are connected to all microcontrollers pins. DIP switch is used to separate port pins from pull-up/pull-down resistors.
- BIGAVR6 development system.
- BIGAVR6 MCU Card with ATMEGA128 Microcontroller
|Applications||Developing and testing firmware, creating prototypes, learning embedded programming|
|Displays||Connector for LCD 2x16 and GLCD 128x64|
|Graphic controller||Embedded inside MCU|
|On-board modules||Socket for DS1820 temperature sensor, A/D Potentiometer, 86 LEDs and push buttons, Real-Time Clock (RTC DS1307),|
|Programming||On-board USB 2.0 programmer for AVR. JTAG port supports in-circuit debugging and firmware programming.|
|Storage||1KB Serial EEPROM (24AA01), MMC/SD card slot|
|Expandability||1 x IDC10 header for each PORT|
|Input Voltage||5V (via USB) or 9-32V AC, 7-23V DC (via adapter)|