298:1 Micro Metal Gearmotor HPCB 6V

₹ 1,779.00 *

Prices incl. GST

Ready to ship today,
Delivery time appr. 1-3 workdays.
2 in stock

  • Pololu-3069
  • 3069
These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to...more
Product information "298:1 Micro Metal Gearmotor HPCB 6V"

These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes. The 6 V and 12 V HPCB motors offer the same performance at their respective nominal voltages, just with the 12 V motor drawing half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical except for their brushes, which only affect the lifetime of the motor.

The HPCB versions (shown on the left in the picture below) can be differentiated from versions with precious metal brushes (shown on the right) by their copper-colored terminals. Note that the HPCB terminals are 0.5 mm wider than those on the other micro metal gearmotor versions (2 mm vs. 1.5 mm), and they are about 1 mm closer together (6 mm vs. 7 mm).

 

Details for item #3069

Exact gear ratio: 25×34×37×35×3812×9×10×13×10≈297.92:125×34×37×35×3812×9×10×13×10≈297.92:1

This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.

Key specifications:

voltageno-load performancestall extrapolation
6 V 110 RPM, 100 mA 3.4 kg⋅cm (47 oz⋅in), 1.5 A

 

Dimensions

Size: 10 × 12 × 26 mm1
Shaft diameter: 3 mm2


General specifications

Gear ratio: 297.92:1
No-load speed @ 6V: 110 rpm
No-load current @ 6V: 0.10 A
Stall current @ 6V: 1.5 A
Stall torque @ 6V: 3.4 kg·cm
Max output power @ 6V: 1.0 W
Extended motor shaft?: N
Long-life carbon brushes?: Y
Motor type: 1.5A stall @ 6V (HPCB 6V - carbon brush)


Performance at maximum efficiency

Max efficiency @ 6V: 26 %
Speed at max efficiency: 85 rpm
Torque at max efficiency: 0.74 kg·cm
Current at max efficiency: 0.42 A
Output power at max efficiency: 0.65 W

Notes

1. Output shaft adds 9 mm to the 26 mm length.

2.  D Shaft.

 

Related links to "298:1 Micro Metal Gearmotor HPCB 6V"
Read, write and discuss reviews...more
Customer evaluation for "298:1 Micro Metal Gearmotor HPCB 6V"
Write a review
Reviews will be activated after verification.

The fields marked with * are required.

Viewed