10:1 Micro Metal Gearmotor MP 6V

Please inform me as soon as the product is available again.
₹ 2,399.00 *

Prices incl. GST

Out of Stock.

  • Pololu-2363
  • 2363
This gearmotor is a miniature  medium-power, 6 V  brushed DC motor with a ...more
Product information "10:1 Micro Metal Gearmotor MP 6V"

This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.

Key specifications:

voltageno-load performancestall extrapolation
6 V 2200 RPM, 40 mA 0.11 kg⋅cm (1.5 oz⋅in), 0.67 A

These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes. The 6 V and 12 V HPCB motors offer the same performance at their respective nominal voltages, just with the 12 V motor drawing half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical except for their brushes, which only affect the lifetime of the motor.

The HPCB versions (shown on the left in the picture below) can be differentiated from versions with precious metal brushes (shown on the right) by their copper-colored terminals. Note that the HPCB terminals are 0.5 mm wider than those on the other micro metal gearmotor versions (2 mm vs. 1.5 mm), and they are about 1 mm closer together (6 mm vs. 7 mm).

 

Details for item #2363

Exact gear ratio: 35×3713×109.96:1">35×3713×109.96:135×3713×10≈9.96:1

This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.

Dimensions

Size: 10 × 12 × 26 mm1
Shaft diameter: 3 mm2

General specifications

Gear ratio: 9.96:1
No-load speed @ 6V: 2200 rpm
No-load current @ 6V: 0.04 A
Stall current @ 6V: 0.67 A
Stall torque @ 6V: 0.11 kg·cm
Extended motor shaft?: N
Motor type: 0.67A stall @ 6V (MP 6V)

Notes:

1.  Output shaft adds 9 mm to the 26 mm length.

2.  D shaft.

Related links to "10:1 Micro Metal Gearmotor MP 6V"
Read, write and discuss reviews...more
Customer evaluation for "10:1 Micro Metal Gearmotor MP 6V"
Write a review
Reviews will be activated after verification.

The fields marked with * are required.

Viewed