ESP32-C3 Mini Development Board

Please inform me as soon as the product is available again.
₹ 999.00 *

Prices incl. GST

Out of Stock.

  • SFE-WRL-18036
  • WRL-18036
The ESP32-C3 Mini Development Board is an entry-level development board based on...more
Product information "ESP32-C3 Mini Development Board"

The ESP32-C3 Mini Development Board is an entry-level development board based on ESP32-C3-MINI-1, a module named for its small size. This board integrates complete Wi-Fi and Bluetooth® LE functions.

Most of the I/O pins on the ESP32-C3-MINI-1 module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-C3-DevKitM-1 on a breadboard.

Features:

  • Wi­Fi
    • IEEE 802.11 b/g/n-compliant
    • Supports 20 MHz, 40 MHz bandwidth in 2.4GHz band
    • 1T1R mode with data rate up to 150 Mbps
    • Wi-Fi Multimedia (WMM)
    • TX/RX A-MPDU, TX/RX A-MSDU
    • Immediate Block ACK
    • Fragmentation and defragmentation
    • Transmit opportunity (TXOP)
    • Automatic Beacon monitoring (hardware TSF)
    • 4 × virtual Wi-Fi interfaces
  • Simultaneous support for Infrastructure BSS in Station mode, SoftAP mode, Station + SoftAP mode, and promiscuous mode. Note that when ESP32-C3 family scans in Station mode, the SoftAP channel will change along with the Station channel
    • Antenna diversity
    • 802.11mc FTM
  • Bluetooth
    • Bluetooth LE: Bluetooth 5, Bluetooth mesh
    • Speed: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
    • Advertising extensions
    • Multiple advertisement sets
    • Channel selection algorithm #2
  • CPU and Memory
    • 32-bit RISC-V single-core processor, up to 160MHz
    • 384 KB ROM
    • 400 KB SRAM (16 KB for cache)
    • 8 KB SRAM in RTC
    • Embedded flash (see details in Chapter 1 Family Member Comparison)
    • SPI, Dual SPI, Quad SPI, and QPI interfaces that allow connection to multiple external flash
  • Advanced Peripheral Interfaces
    • 22 × programmable GPIOs
    • Digital interfaces:
      • 3 × SPI
      • 2 × UART
      • 1 × I2C
      • 1 × I2S
      • Remote control peripheral, with 2 transmit channels and 2 receive channels
      • LED PWM controller, with up to 6 channels
      • Full-speed USB Serial/JTAG controller
      • General DMA controller (GDMA), with 3 transmit channels and 3 receive channels
      • 1 × TWAI® controller (compatible with ISO 11898-1)
    • Analog interfaces:
      • 2 × 12-bit SAR ADCs, up to 6 channels
      • 1 × temperature sensor
    • Timers:
      • 2 × 54-bit general-purpose timers
      • 3 × watchdog timers
      • 1 × 52-bit system timer Low Power Management
    • Power Management Unit with four power modes Security
    • Secure boot
    • Flash encryption • 4096-bit OTP, up to 1792 bits for users • Cryptographic hardware acceleration: – AES-128/256 (FIPS PUB 197)

Documents:

Related links to "ESP32-C3 Mini Development Board"
Read, write and discuss reviews...more
Customer evaluation for "ESP32-C3 Mini Development Board"
Write a review
Reviews will be activated after verification.

The fields marked with * are required.

Viewed