Top seller
No results were found for the filter!
Gravity: O2 Sensor (Calibrated) - I2C & UART This is a sensor that detects oxygen concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of oxygen in the...
₹ 8,409.00 *
Gravity: I2C Ozone Sensor (0-10ppm) Gravity: I2C Ozone Sensor (0-10ppm) is based on electrochemical principles and it can measure the ambient O3 concentration accurately and conveniently. With high anti-interference ability, high stablility and high sensitivity, this...
₹ 4,859.00 *
Gravity: Analog Gas Sensor (MQ2) For Arduino This is a generic Arduino gas sensor. It has MQ2 probe which is able to detect LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke. It can be used in gas leakage detecting device in consumer and industry markets. It has a high...
₹ 689.00 *
Fermion: MEMS Gas Sensor - MiCS-5524 (Breakout) This is a hydrogen and nitrogen oxide gas concentration sensor launched by DFRobot. The sensor uses MEMS technology to support gas concentration detection of CO, CH4, C2H5OH, C3H8, C4H10, H2, H2S and NH3. The matching sample code...
₹ 979.00 *
F1031V Mass Air Flow Sensor F1031V Mass Air Flow Sensor adopts thermodynamic principle to detect flow rate of gas medium in the flow channel, with high precision and good repeatability. It comes with built-in temperature sensor to provide temperature compensation...
₹ 8,499.00 *
Anemometer Kit 0-5V (IP65 grade) Ever want to build your own weather station? This anemometer is made of shell, wind cups and circuit module. It has built-in photovoltaic module, industrial microcomputer processor, and standard current generator. Made with aluminium...
₹ 4,749.00 *
Gravity: Analog Carbon Monoxide Sensor (MQ7)... This is an Arduino Carbon Monoxide Sensor. It uses MQ7 probe to detect Carbon Monoxide (CO) concentrations in the air from 20 to 2000ppm. The sensitivity can be adjusted by the potentiometer. The output is proportional to the density of...
₹ 979.00 *
Gravity: PM2.5 Air Quality Sensor As the most basic part of life, air is attracting more and more attention, for example, the most common PM2.5, PM1.0, PM10, etc. Keeping an eye on the quality of the air we breath is becoming quite important. DFRobot brings you this Air...
₹ 3,959.00 *
Gravity: SGP40 Air Quality Sensor The SGP40 Air Quality sensor adopts the new SGP40 digital VOC sensor chip launched by the well-known Sensirion. Based on the Sensirion’s CMOSens® technology, the SGP40 offers a complete sensor system on a single chip, a...
₹ 1,379.00 *
Atlas Scientific Wi-Fi Pool Kit The Wi-Fi Pool Kit reads pH, ORP, and temperature. The pH readings are automatically temperature compensated and uploaded to ThingSpeak, which allows for remote readings on a phone, tablet or PC. The code and instructions are available...
₹ 59,449.00 *
Atlas Scientific Bare-Bones Wi-Fi Pool Kit Whether you already own Atlas Scientific EZO circuits or want to customize this kit and turn it into something completely different, this Bare-Bones Kit has got you covered. You need to provide your own: EZO-pH circuit & pH probe EZO-ORP...
₹ 11,699.00 *
Gravity: I2C Oxygen Sensor INTRODUCTION The Gravity: I2C Oxygen Sensor is based on electrochemical principles and it can measure the ambient O2 concentration accurately and conveniently. With high anti-interference ability, high stablility and high sensitivity,...
₹ 5,339.00 *
Fermion ENS160 Fermion SGP40 Gravity HF Gravity PH3 Gravity Dust RS485 Wind Gravity Analog Weather Station Atlas Gravity NH3 Gravity SGP40 Anemometer Kit Gravity Analog Analog Gas Gravity PM2.5 Gravity I2C Gravity NO2 Gravity O2 Gravity MEMS Carbon Monoxide Gravity ENS160 Gravity Analog Gravity H2S Gravity Analog Gravity CO Gravity Analog Fermion MEMS Gravity H2 Air Quality Gravity Analog Multi-function Gravity UART Analog Alcohol Gravity Alcohol CCS811 Air Atlas Gravity SO2 Gravity I2C Gravity Analog Gravity HCL Gravity CL2 Gravity Analog Gravity O3 Gravity Fermion MEMS F1031V Mass Air
Viewed