RUT200 Industrial Cellular Router

Features

• Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps

• 3GPP Release - Release 9

• Status - Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID

• SMS - SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

• USSD - Supports sending and reading Unstructured Supplementary Service Data messages

• Black/White list - Operator black/white list

• Multiple PDN - Possibility to use different PDNs for multiple network access and services

• Band management - Band lock, Used band status display

• APN - Auto APN

• Bridge - Direct connection (bridge) between mobile ISP and device on LAN

• Passthrough - Router assigns its mobile WAN IP address to another device on LAN

• Wireless mode - IEEE 802.11b/g/n, Access Point (AP), Station (STA)

• WiFi security - WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation

• SSID/ESSID - SSID stealth mode and access control based on MAC address

• WiFi users - Up to 50 simultaneous connections

• Wireless Hotspot - Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

• WAN - 1 x WAN port  10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

• LAN - 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

• Routing - Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)

• Network protocols - TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)

• VoIP passthrough support - H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

• Connection monitoring - Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

• Firewall - Port forward, traffic rules, custom rules

• DHCP - Static and dynamic IP allocation, DHCP Relay, Relayd

• QoS / Smart Queue Management (SQM) - Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

• DDNS - Supported >25 service providers, others can be configured manually

• Network backup - WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

• Load balancing - Balance Internet traffic over multiple WAN connections

• Hotspot - Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes

• SSHFS - Possibility to mount remote file system via SSH protocol

• Authentication - Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block

• Firewall - Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

• Attack prevention - DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

• VLAN - Port and tag based VLAN separation

• Mobile quota control - Custom data limits for SIM card

• WEB filter - Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

• Access control - Flexible access control of TCP, UDP, ICMP packets, MAC address filter

• OpenVPN - Multiple clients and a server can run simultaneously, 27 encryption methods

• OpenVPN Encryption - DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256

• IPsec - IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

• GRE - GRE tunnel, GRE tunnel over IPsec support

• PPTP, L2TP - Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

• Stunnel - Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

• DMVPN - Method of building scalable IPsec VPNs

• SSTP - SSTP client instance support

• ZeroTier - ZeroTier VPN client support

• WireGuard - WireGuard VPN client and server support

• Tinc - Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.

• ID range - Respond to one ID in range [1;255] or any

• Allow Remote Access - Allow access through WAN

• Custom registers - MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

• Supported functions - 01, 02, 03, 04, 05, 06, 15, 16

• Supported data formats - 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

• Protocol - HTTP(S), MQTT, Azure MQTT, Kinesis

• MQTT Gateway - Allows sending commands and receiving data from MODBUS Master through MQTT broker

• Supported modes - TCP Master, DNP3 Outstation

• WEB UI - HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

• FOTA - Firmware update from server, automatic notification

• SSH - SSH (v1, v2)

• SMS - SMS status, SMS configuration, send/read SMS via HTTP POST/GET

• Call - Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off

• TR-069 - OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

• MQTT - MQTT Broker, MQTT publisher

• SNMP - SNMP (v1, v2, v3), SNMP Trap

• JSON-RPC - Management API over HTTP/HTTPS

• MODBUS - MODBUS TCP status/control

• RMS - Teltonika Remote Management System (RMS)

• Cloud of Things - Allows monitoring of: Device data, Mobile data, Network info, Availability

• ThingWorx - Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

• Cumulocity - Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength

• Azure IoT Hub - Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

• CPU - Mediatek MIPS 24Kc 580 MHz

• RAM - 128 MB, DDR2

• FLASH storage - 16 MB, SPI Flash

• WEB UI - Update FW from file, check FW on server, configuration profiles, configuration backup

• FOTA - Update FW

• RMS - Update FW/configuration for multiple devices at once

• Keep settings - Update FW without losing current configuration

• Operating system - RutOS (OpenWrt based Linux OS)

• Supported languages - Busybox shell, Lua, C, C++

• Development tools - SDK package with build environment provided

• Input - 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high

• Output - 1 x Digital Output, Open collector output, max output 30 V, 300 mA

• Events - Email, RMS, SMS

• I/O juggler - Allows to set certain I/O conditions to initiate event

• Connector - 4-pin industrial DC power socket

• Input voltage range - 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max

• PoE (passive) - Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 - 50 VDC

• Power consumption - < 6.5 W Max

• Ethernet - 2 x RJ45 ports, 10/100 Mbps

• I/O’s - 1 x Digital Input, 1 x Digital Output on 4-pin power connector

• Status LEDs - 3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED

• SIM - 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder

• Power - 1 x 4-pin power connector

• Antennas - 2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors

• Reset - Reboot/User default reset/Factory reset button

• Casing material - Aluminium housing, plastic panels

• Dimensions (W x H x D) - 83 x 25 x 74 mm

• Weight - 125 g

• Mounting options - Bottom and sideways DIN rail mounting slots

• Operating temperature - 40 °C to 75 °C

• Operating humidity - 10% to 90% non-condensing

• Ingress Protection Rating - IP30

• Regulatory - CB

• Standards - IEC 62368-1:2018 (CB Scheme)