• Polypropylene construction • Dual EPDM O-rings • NSF Standard 58 Certified

• No wiring, no bread boards • No soldering necessary, comes fully assembled • Built in electrical isolation means that sensors won’t interfere with each other, and removes outside electrical noise that can interfere with readings. •...

• No wiring, no bread boards • No soldering necessary, comes fully assembled • Built in electrical isolation means that sensors won’t interfere with each other, and removes outside electrical noise that can interfere with readings. •...

This breakout board comes with • (2) 4.7K resistors (used for I2C pull ups) • (2) Jumper pins and jumpers • (1) BNC connector • (1) Single row of five male header pins • This board does not come with components attached. • This board...

Attaches to a 1.5" PVC drain pipe allowing easy access to a drain pipe. • Drill 1/4" hole in drain pipe • Position saddle on pipe and fasten with included screws • Push in tubing

Reads Pressure (Gauge) psi (0-50) Default atm (0 - 3.402) bar (0 - 3.447) kPa (0 - 344.738) inches of water (0 - 1,385.38”) cm of water (0 - 3,515.35cm) Response time 1 reading per second Resolution 0.001 Accuracy Threaded connection...

Specification • Tinned lead connector • Accurate to ± 5% • Material Brass • 3/4” Female NPT Input/Output • Minimum flow rate 19 L / min (5 GPM) • Maximum flow rate 114 L / min (30 GPM) • Weighs 796.5g • Operating temperature -29º C to...

Specification • Tinned lead connector • Accurate to ± 5% • Material: Polypropylene • 1/2” Female NPT Input/Output • Minimum flow rate 5.7 L / min (1.5 GPM) • Maximum flow rate 75.70 L / min (20 GPM) • Weighs 104.3g • Operating...

Specification • Tinned lead connector • Accurate to ± 5% • Material: Polypropylene • 1/4” Female NPT Input/Output • Minimum flow rate 378 mL / min (0.1 GPM) • Maximum flow rate 19 L / min (5 GPM) • Weighs 101.5g • Operating temperature...

Specification • Tinned lead connector • Accurate to ± 2% • Material Glass Reinforced PPO (Noryl) • 3/8” Male NPT Input/Output • Each pulse is equal to 367 μL • Minimum flow rate 760 mL / min (0.2 GPM) • Maximum flow rate 7.6 L / min (2...

• 1 EZO™ Universal Flow Meter Totalizer Circuit • 1 3/4" Female NPT Flow Meter - 19 L / min to 114 L / min • 1 Flow Connector Board (soldering required) • 1 80 Mesh stainless steel pre-filter (178 microns) • Food Safe • Gasoline Safe •...

Specification • 1 EZO™ Universal Flow Meter Totalizer Circuit • 1 1/2" Female NPT Flow Meter - 5.7 L / min to 75.70 L / min • 2 1/2" Male NPT Connectors • 1 Flow Connector Board (soldering required) • 1 80 Mesh stainless steel pre-filter...