Are you working with a PLC and aren’t sure what parts are right for you? Let us help you. This is the Atlas Scientific, Industrial Conductivity kit. It comes with everything you need to take high accuracy, interference-free readings with...

High accuracy sensors require high accuracy calibration solutions. Atlas Scientific conductivity calibration solutions are made using a six-stage process to ensure the highest accuracy. If you need a certificate of analysis, just email...

The Atlas Scientific industrial conductive probe is designed for inline conductivity measurements. From industrial chemical processing to swimming pool monitoring, this probe can be used for just about anything. The 3/4″ female NPT...

This Mini Conductivity Probe can be fully submerged in fresh water or salt water, up to the SMA connector indefinitely. Reads Conductivity Range 5 − 200,000 μS/cm Accuracy +/ – 2% Connector Female SMA Response time 90% in 1s Max pressure...

Features For Industrial K 1.0 Calibration 125ml (4oz) Standardized against NIST-certified references 2 year shelf life at room temperature This set includes 1 (1,413µS) and 1 (12,880µS)

Reads Conductivity Range 5 − 200,000μS/cm Accuracy +/ – 2% Connector Tinned leads Response time 90% in 1s Max pressure 200 PSI Max depth 60m (197 ft) Temperature range °C 0 − 110 °C Cable length 3 meters Pipe fitting 3/4" threaded NPT...

Specification • 1 IXIAN™ Conductivity Transmitter • 1 Industrial Conductivity Probe K 1.0 • 3/4″ NPT pipe thread on input and output side • 2 250ml (8oz) calibration solutions K 1.0 – This set includes 1 (1,413µS) and 1 (12,880µS) Probe...

Reads Conductivity = μS/cm Total dissolved solids = ppm Salinity = PSU (ppt) 0.00 – 42.00 Specific gravity (sea water only) = 1.00 – 1.300 Range 0.07 − 500,000+ μS/cm Accuracy +/ – 2% Response time 1 reading per sec Supported probes K...

Over the years, we have tested an endless number of conductivity probe designs. Our research has shown us that not all conductivity probes are the same. Many lower-quality probes are susceptible to “fringe effect,” which makes the...

This Conductivity Probe can be fully submerged in fresh water or salt water, up to the BNC connector indefinitely. Reads Conductivity Range 5 − 200,000 μS/cm Accuracy +/ – 2% Connector Male BNC Response time 90% in 1s Max pressure 3,447...

This Conductivity Probe can be fully submerged in fresh water or salt water, up to the BNC connector indefinitely. Reads Conductivity Range 0.07 − 50,000 μS/cm Accuracy +/ – 2% Connector Male BNC Response time 90% in 1s Max pressure...

Those of us who work with PLCs clearly understand both the power and limitations of industrial computers. Modern low voltage elections and communication protocols aren’t easily compatible with PLCs. Fortunately, the Atlas Scientific...