• Polypropylene body / collets • Acetal check valve insert • Dual EPDM O-rings • 0-150 PSI pressure rating • 33° - 140°F ( 1° - 60°C) Temperature rating in Electronics in P&ID

• Splits water flow • Polypropylene construction • NSF Standard 58 Certified

The Atlas Scientific Flow Connector Board, does not come assembled; soldering is required . • Easily connects flow meter to EZO™ Universal Flow Meter Totalizer • Simple connection R - Vcc, W - Signal, B - Ground

• Exclusive ¼ turn lever with safety collar • Standard materials – PVC with EPDM seals • NSF Standard 58 Certified • 150 PSI @ 70°F (10 Bar @ 20°C)

• Replacement part for the Atlas Scientific 1/4" Flow Meter . • Insert the low flow adapter into the INPUT side of flow meter.

Reads Conductivity Total dissolved solids (ppm) Salinity = PSU (ppt) 0.00 − 42.00 Range 0.07 − 500,000+ μS/cm Accuracy +/ – 2% Response time 1 reading every 640ms Supported probes K 0.01 – K 600 any brand Calibration 1 or 2 point Temp...

The PT-1000 can be fully submerged in fresh water or salt water, up to the BNC connector indefinitely. • 1 EZO™ RTD Temperature Circuit • 1 Temperature Thermowell (choice of 100mm, 50mm or 30mm) • 1 PT-1000 Temperature Probe with BNC...

Reads Conductivity = μS/cm Total dissolved solids = ppm Salinity = PSU (ppt) 0.00 – 42.00 Specific gravity (sea water only) = 1.00 – 1.300 Range 0.07 − 500,000+ μS/cm Accuracy +/ – 2% Response time 1 reading per sec Supported probes K...

Reads Gaseous CO2 Range 0 − 10,000 ppm Calibration Factory calibrated Response time 1 reading per second Resolution 1 ppm Accuracy +/- 3% +/- 30 ppm Connector 5 lead data cable Warmup time 10 seconds Cable length 1 meter Data protocol...

• This temperature thermowell is used to protect temperature probes placed in systems with high pressure or flow. • 100mm thermowell extension • Temperature range: -273°C to 1300°C • Threading: 1/2" NPT • Material: 304 stainless steel •...

Those of us who work with PLCs clearly understand both the power and limitations of industrial computers. Modern low voltage elections and communication protocols aren’t easily compatible with PLCs. Fortunately, the Atlas Scientific...

Specification • 1 IXIAN™ Conductivity Transmitter • 1 Industrial Conductivity Probe K 1.0 • 3/4″ NPT pipe thread on input and output side • 2 250ml (8oz) calibration solutions K 1.0 – This set includes 1 (1,413µS) and 1 (12,880µS) Probe...