Top seller
No results were found for the filter!
myDigital Protoboard for NI myDAQ & myRIO The Digilent myDigital accessory board for the NI myDAQ and NI myRIO is designed to provide students a cost-effective, portable, and engaging platform for teaching electronics. With a myDAQ / myRIO, NI Multisim, and a myDigital, you'll...
₹ 11,099.00 *
High Current Adapter for NI myRIO With the High Current Adapter, you can use your NI myRIO to interact with high current applications such as driving LED Strips, relays, and servos. (For motor applications, please see the myRIO Motor Adapter Board.) The High Current...
₹ 4,999.00 *
Analog Discovery 2x15 Ribbon Cable This cable is a handy accompaniment to your Analog Discovery or Analog Discovery 2. This ribbon cable allows you to extend all 30 pins on the 2x15 pin male connector to a 2x15 pin female connector. The ribbon cable allows the pins of the...
₹ 1,089.00 *
Heatsink with Clip This heatsink is a great way to ensure that none of your chips overheat, and with its convenient clip and adhesive backing, installation and removal is a breeze. The clip will fit perfectly on the Virtex-5 board, or any chip measuring...
₹ 1,839.00 *
MXP Extender Cable for myRIO This cable is designed to extend reach of the myRIO expansion port (MXP). The MXP extender cable is perfectly suited for mounting expansion boards, such as the Pmod Adapter. Features: 34-pin male and female connectors 8" length (210±10mm)
₹ 569.00 *
myProto Protoboard for NI myDAQ & myRIO The Digilent myProto accessory board for the NI myDAQ and NI myRIO brings all your myDAQ/myRIO's signals to breadboard connections where they can be easily accessed using simple jumper wires, and even adds several useful I/O devices. The...
₹ 5,999.00 *
Shield Adapter (Uno R3) for NI myRIO With the Shield Adapter for NI myRIO , you can now connect your myRIO to the expansive shield options offered by the Arduino ecosystem. The Shield Adapter is designed to work with any shield that is compatible with the Arduino® Uno using...
₹ 2,499.00 *
Motor Adapter for NI myRIO The Motor Adapter for NI myRIO allows you to easily connect and control either one stepper motor, two DC motors, or two servos independently through the MXP connector on your myRIO. It has been designed so that no additional circuitry is...
₹ 7,999.00 *
Coax Power Cable Features: 2.1mm female power connector for use with Digilent power supplies Useful for any Digilent product that can accept power from an outside source
₹ 229.00 *
HDMI Cable (Type A to Type D Micro) Features: 40" in length Type A to Type D Micro HDMI cable
₹ 1,489.00 *
Speaker Have you been searching for a speaker with a male auxiliary connector and cable that will allow you to blast all of the sounds that your heart desires? With a bandwidth frequency range of 880Hz to 10KHz, this speaker will work seamlessly...
₹ 1,489.00 *
Embedded Vision Bundle The Embedded Vision Bundle makes a valuable tool for anyone looking develop their own embedded vision products and applications, or to learn more about embedded vision concepts. The bundle includes the Zybo Z7-20 Zynq-7000 ARM/FPGA SoC...
₹ 39,529.00 *
Analog Motor Adapter 2x15 Flywires myParts Kit myDigital Analog Half-Size Analog Wire Wrap or Standoffs DMM Probes USB A to Mini-B 2x6 Pin Header Analog Analog Parts 30-pin Flywire 40-pin DIP OpenScope MZ UK Wall Plug High Current Impedance Breadboard Analog Ultimate Analog 1-pin MTE Cable Speaker Analog Blank Canvas Breadboard 2x16 Flywires BNC to FX2 Module Digital Embedded Vision NI Multisim Solderless Shield Adapter Analog NXT Sensor 9V PowerBRICK Mini Grabber Analog Analog Analog Solderless DMM Shield
Viewed