EasyMx PRO v7 for STM32 MCUcard with STM32F207VGT6

EasyMx PRO v7 for STM32 MCUcard with STM32F207VGT6
Please inform me as soon as the product is available again.
₹ 2,519.00 *

Prices incl. GST

Out of Stock.

  • MIKROE-1104
  • MIKROE-1104
STM32F207VGT6  has 120MHz frequency, 1 Mbyte of Flash memory, 128K + 4K bytes of...more
Product information "EasyMx PRO v7 for STM32 MCUcard with STM32F207VGT6"

STM32F207VGT6 has 120MHz frequency, 1 Mbyte of Flash memory, 128K + 4K bytes of general-purpose SRAM, integrated Ethernet controller, USB 2.0 (OTG, Host, Device), 83 General purpose I/O pins, 12x16-bit and 2x32-bit timers, 3x12-bit A/D (24 channels), 2x12-bit D/A , 4xUSARTs, 2xUARTs, internal Real time clock (RTC), 2xI2C, 3xSPI and 2xCAN controllers.

25MHz crystal oscillator. We carefully chose the most convenient crystal value that provides clock frequency which can be used directly, or with the PLL multipliers to create higher MCU clock value. MCU card also contains 32.768 kHz crystal oscillator which provides external clock for RTCC module.

USB communications lines. These two jumpers, when in USB position, connect D+ and D- lines of the on-board USB connector with PA11 and PA12 microcontroller pins. Since STM32F207VGT6 supports USB, jumpers are in USB position.

Ethernet transceiver. MCU card contains single-chip Ethernet physical (PHY) layer transceiver which provides additional Ethernet functionality to STM32F207VGT6 controller

Specification

Architecture ARM (32-bit)
MCU STM32F207VGT6
MCU speed 120 MHz
MCU Memory 1 MB of Flash, 128 KB of RAM
Input Voltage 3.3V
Compatibility EasyMx PRO v7 for STM32

 

Related links to "EasyMx PRO v7 for STM32 MCUcard with STM32F207VGT6"
Read, write and discuss reviews...more
Customer evaluation for "EasyMx PRO v7 for STM32 MCUcard with STM32F207VGT6"
Write a review
Reviews will be activated after verification.

The fields marked with * are required.

Viewed