16x9 G click

Please inform me as soon as the product is available again.
₹ 3,569.00 *

Prices incl. GST

Out of Stock.

  • MIKROE-2520
  • MIKROE-2520
16x9 G click  contains a  green   LED matrix  and the  IS31FL3731...more
Product information "16x9 G click"

16x9 G click contains a green LED matrix and the IS31FL3731 audio modulated matrix LED driver. The dimension of the LED matrix is 16x9. Each LED can be controlled individually – both for on/off control and light intensity. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over I2C interface and the following mikroBUS™ pins: PWM, INT, CS.

The IS31FL3731 matrix driver

The IS31FL3731 is a compact LED driver for 144 single LEDs. The driver has three operating modes, Picture Mode, Auto Frame Play Mode and Audio Frame Play Mode:

Picture Mode — the driver can store up to 8 frames. In Picture Mode you can show one of these frames at a time.

Auto Frame Play Mode — In this mode you can automatically play the 8 frames in order.

Audio Frame Play Mode —You can play the 8 frames to the rhythm of the music of your choice. The displayed LED frames can be modulated with audio signal intensity. The driver plays the first frame when the value is the smallest and plays the eighth frame when the value is the biggest.

For more information about the different modes, see the LED driver datasheet.

Audio signal - The LED frames can be modulated with the intensity of the audio signal. 

Light intensity - It is possible to set the intensity of each frame individually, and to use the intensity setting of frame 1 for all other frames.

Specifications

Type LED Matrix
Applications LED display for various hand-held devices, home appliances, IoT devices, etc.
On-board modules IS31FL3731 matrix LED driver
Key Features 16x9 LED matrix, 144 single LEDs, 8 frames memory for animations, Individual blink control, Auto Frame Play Mode, Audio Frame Play Mode
Key Benefits light intensity control, Audio Frame Play Mode
Interface GPIO,I2C
Input Voltage 3.3V or 5V
Compatibility mikroBUS
Click board size M (42.9 x 25.4 mm)

Pinout diagram

This table shows how the pinout on 16x9 G click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

NotesPinMikrobus logo.pngPinNotes
  NC 1 AN PWM 16 IN Audio Input
  NC 2 RST INT 15 INT Interrupt
Standby SDB 3 CS RX 14 NC  
  NC 4 SCK TX 13 NC  
  NC 5 MISO SCL 12 SCL I2C clock
  NC 6 MOSI SDA 11 SDA I2C data
Power supply +3.3V 7 3.3V 5V 10 +5V Power supply
Ground GND 8 GND GND 9 GND Ground

Jumper and Settings

This table shows the onboard jumpers and additional settings.

DesignatorNameDefault PositionDefault OptionDescription
JP1 PWR.SEL. Left 3V3 Power Supply Voltage Selection 3.3V/5V, left position 3.3V, right position 5V
JP2 ADDR SEL Left 0 The last two bits of the I2C address

Programming

The Library provide access to the function registers of the driver, and basic graphic manipulation of each frame.

Code snippet

The code snippet shows how to draw one frame and display it.

01 void main()
02 {
03     system_init();
04
05     // Hardware power on.
06     click_16x9_shutdown_hw(false);
07     // Software shutdown mode.
08     click_16x9_shutdown_sw(true);
09
10     // Turn on all LED's in frame 1, and draw circle.
11     click_16x9_begin_frame(FRAME_1);
12     {
13         click_16x9_control_all(CTRL_LED, true);
14         click_16x9_fill_screen(0x00);
15         click_16x9_circle(x, y, radius, pwm);
16     }
17     click_16x9_end_frame();
18
19     // Display frame 1.
20     click_16x9_func_reg(REG_PICTURE_DISPLAY, 0);
21
22     // Software normal operation mode.
23     click_16x9_shutdown_sw(false);
24
25     while (1);
26 }

 

Related links to "16x9 G click"
Read, write and discuss reviews...more
Customer evaluation for "16x9 G click"
Write a review
Reviews will be activated after verification.

The fields marked with * are required.

Viewed