Top seller
Brushless 3 click Brushless 3 click
₹ 1,999.00 *
Brushless 2 click Brushless 2 click
₹ 1,789.00 *
Stepper 4 click Stepper 4 click
₹ 1,999.00 *
Fan 2 click Fan 2 click
₹ 1,579.00 *
DC MOTOR 5 click DC MOTOR 5 click
₹ 1,789.00 *
DC MOTOR 4 click DC MOTOR 4 click
₹ 1,579.00 *
PWM driver click PWM driver click
₹ 1,469.00 *
DC MOTOR 3 Click DC MOTOR 3 Click
₹ 1,999.00 *
Stepper 3 click Stepper 3 click
₹ 1,999.00 *
Stepper 2 click Stepper 2 click
₹ 1,999.00 *
HAPTIC click HAPTIC click
₹ 2,419.00 *
Fan click Fan click
₹ 1,039.00 *
Close filters
 
  •  
from to
1 From 4
No results were found for the filter!
DC Motor 10 click
DC Motor 10 click
This Click board™ is optimized for driving brushed DC motors. it integrates an efficient H-Bridge with very low ON resistance of approximately 0.8Ω through each branch. Furthermore the build-in features like Over- and...
₹ 1,789.00 *
STSPIN233 click
STSPIN233 click
STSPIN233 click is a complete solution for a 3-phase integrated motor driver, based on the STSPIN233, Low voltage 3-phase integrated motor driver. It is optimized for battery-powered, low voltage motor driving applications, featuring the...
₹ 1,789.00 *
Fan 6 click
Fan 6 click
The Fan 6 click is a Click board™ which features EMC2103, an SMBus compliant fan controller with up to up to 3 external and 1 internal temperature channels. The fan driver can be operated using two methods each with two modes. The...
₹ 1,679.00 *
H-Bridge 4 Click
H-Bridge 4 Click
H-Bridge 4 Click is a Click board™ that contains the AP1010AEN, which is a two channel H-Bridge motor driver compatible with a motor operating voltage up to 18V and can drive two DC motors or one stepper motor. The protection circuit has...
₹ 1,579.00 *
H-Bridge 5 Click
H-Bridge 5 Click
The H-Bridge 5 Click is designed for control DC motors and inductiv loads. This Click board™ contains the MP6515GF-Z, a H-bridge motor driver from MPS, It features an Full H-Bridge driver with Internal safety features include...
₹ 1,579.00 *
H-Bridge 2 click
H-Bridge 2 click
H-Bridge 2 click can be used to drive a motor by utilizing a specific configuration of the output stage MOSFETs, known as the H-bridge. This configuration enables H-Bridge 2 click to drive a motor with up to 1.2A and 15V, providing...
₹ 1,889.00 *
H-Bridge click
H-Bridge click
H-Bridge click is a high-efficiency dual H-bridge driver Click board™, capable of providing reasonably high current while driving the connected load with up to 7V. Since the used driver IC has two full H-bridge channels, this Click...
₹ 1,679.00 *
Brushless 4 click
Brushless 4 click
Brushless 4 click is a 3 phase sensorless BLDC motor driver, which features a 180° sinusoidal drive, providing high efficiency and low acoustic noise. This type of drivers inherently provides higher torque in general, compared to...
₹ 1,999.00 *
Brushless 5 click
Brushless 5 click
Brushless 5 click is a 3 phase sensorless BLDC motor controller, with a soft-switching feature for reduced motor noise and EMI, and precise BEMF motor sensing, which eliminates the need for Hall-sensors in motor applications. It can...
₹ 1,999.00 *
DC Motor 8 click
DC Motor 8 click
DC Motor 8 click is a DC motor driver. It can drive simple DC motors with brushes, providing them with a significant amount of current and voltage up to 40V. The click has one control input, that uses the PWM signal from the host MCU. It...
₹ 1,889.00 *
STSPIN250 click
STSPIN250 click
STSPIN250 click is a brushed DC motor driver with the current limiting and current sensing. It is based on the STSPIN250, a low voltage DC brushed motor driver. It is optimized for portable and low voltage applications, featuring the...
₹ 1,479.00 *
STSPIN220 click
STSPIN220 click
STSPIN220 click is a stepper motor driver with the PWM current control and selectable microstepping up to 256 microsteps. It is based on the STSPIN220, a low voltage stepper motor driver from STSPIN2 series. It is optimized for...
₹ 2,059.00 *
1 From 4
Viewed