No results were found for the filter!
AudioAmp 3 Click
AudioAmp 3 Click is a stereo audio amplifier, capable of delivering up to 79W per channel with the 4Ω load. It is based on the TAS5414, a class-D integrated amplifier, which utilizes a highly efficient switching scheme. Advanced EMI...
₹ 4,729.00 *
AM/FM Click is a RADIO RECEIVER click board™ that can be used to listen to music from the AM and FM radio bands. One of the advantages of this versatile FM broadcast stereo transmitter IC is that it is very easy to work with it, which...
₹ 5,149.00 *
RadioStation click is a unique click board™ that can be used to broadcast the music via the FM radio band. It features the Si4713-B30 from Silicon Labs , the best in class integrated FM broadcast stereo transmitter, which operates in the...
₹ 2,629.00 *
2x20W Amp click
2x20W Amp click carries the MAX9744 stereo class D audio power amplifier from Maxim Integrated. This click brings the Class AB sound performance with Class D efficiency. The perfect combination for your speakers. 2x20W Amp click also...
₹ 2,209.00 *
BUZZ 2 click
BUZZ 2 click carries the CMT-8540S-SMT magnetic buzzer transducer. The buzzer’s resonant frequency is 4kHz. The click is designed to run on either 3.3V or 5V power supply. How the click works The CMT-8540S-SMT magnetic buzzer is...
₹ 1,259.00 *
Mic click carries the SPQ0410HR5H-B surface mount silicon microphone with maximum RF protection. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over the AN pin on the mikroBUS™ line....
₹ 949.00 *
GainAMP click carries the LTC®6912 dual channel, low noise, digitally programmable gain amplifier (PGA). The click is designed to work on either 3.3V or 5V power supply. It communicates with the target MCU over SPI interface, with...
₹ 1,579.00 *
2x5W AMP click
2x5W AMP click functions as an amplifier and features the TDA7491LP 2x5-watt dual BTL class-D audio amplifier. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target MCU over the following pins on...
₹ 1,999.00 *
The StereoAmp click features a 3.5mm input jack and four output screw terminals for connecting passive speakers. It runs on either 3.3V or 5V power supply and communicates with the MCU through the I2C interface. Volume control Each...
₹ 2,519.00 *
When the volume of ambient sound reaches the set threshold, an interrupt is triggered. The most important parts of the circuit are the microphone, an RMS-to-DC converter, two dual rail-to-rail Input/Output 10 MHz operational amplifiers,...
₹ 3,049.00 *
AudioAmp click is a mikroBUS™ add-on board that functions as a mono audio amplifier. It is driven by a Texas Instruments LM48100Q-Q1 Boomer™ Mono, 1.3W Audio Power Amplifier IC. AudioAmp click has one 3.5 mm input jack and next to it...
₹ 1,469.00 *
Text To Speech click is a mikroBUS™ add-on board that carries an Epson S1V30120 speech synthesis IC. The IC is powered by the Fonix DECtalk® v5 speech synthesis engine that can make your robot or portable device talk in US English,...
₹ 4,099.00 *
TextToSpeech RadioStation Audio Amp 6 Buzz Click GainAMP click AudioAmp 3 REC PLAY Click Audio Amp 5 BUZZ 2 click Mic click MIC 2 click AudioAmp click AudioAmp 2 EVC Click GainAMP 2 click AudioMUX Click AudioAmp 4 StereoAmp click AM FM Click 2x5W AMP click FM click 2x20W Amp click Noise click MP3 Click