Top seller
No results were found for the filter!
Pmod TC1: K-Type Thermocouple Module with Wire The Digilent Pmod TC1 is a cold-junction thermocouple-to-digital converter module designed for a classic K-Type thermocouple wire. With Maxim Integrated's MAX31855, this module reports the measured temperature in 14-bits with 0.25°C...
₹ 2,409.00 *
Pmod MIC3: MEMS Microphone with Adjustable Gain The Pmod MIC3 is a MEMS Microphone powered by the Knowles Acoustics S PA2410LR5H-B microphone and the Texas Instruments ADCS7476 analog-to-digital converter. Users may adjust the incoming volume to the system board with the small...
₹ 1,349.00 *
Pmod TMP3: Digital Temperature Sensor The Pmod TMP3 is an ambient temperature sensor built around the Microchip TCN75A . Users may configure the output through I 2 C to up to 12 bits of resolution as well as setting a trigger to occur when a user defined temperature...
₹ 1,249.00 *
Pmod AMP3: Stereo Power Amplifier The Pmod AMP3 uses a 2W Class-D audio power amplifier, the Analog Devices SSM2518 . Users are able to provide stereo audio through either I 2 S or TDM at a variety of sampling frequencies. The I 2 C interface can be used to configure the...
₹ 1,919.00 *
Pmod PMON1: Power Monitor The Pmod PMON1 is a power monitoring system that uses the Analog Devices AD5112 and ADM119 . By using I 2 C, users can set a reference voltage on the AD5112 to indicate what qualifies as an overcurrent condition for the ADM119. Once an...
₹ 959.00 *
Pmod DPOT: Digital Potentiometer The Pmod DPOT is a digital potentiometer powered by the Analog Devices' AD5160. Users may set a desired resistance between 60Ω and 10kΩ by programming the chip through SPI. Features: Uses the Analog Devices AD5610 Digital potentiometer...
₹ 1,249.00 *
Pmod TMP2: Temperature Sensor The Pmod TMP2 is an ambient temperature sensor powered by the Analog Devices ® ADT7420 . Through the I 2 C interface, users may appreciate a resolution of 0.0078°C through 16 bits of data. Features: 16-bit ambient temperature sensor...
₹ 1,439.00 *
Pmod IOXP: I/O Expansion Module The Pmod IOXP is an I/O expansion module powered by the Analog Devices ADP5589. By communicating with the chip through I 2 C, users can take advantage of up to 19 additional I/O pins as well as a keypad matrix decoder. Features:...
₹ 2,129.00 *
Pmod RTCC: Real-time Clock / Calendar The Pmod RTCC is a real-time clock/calendar powered by the Microchip ® MCP79410. Through the I 2 C interface, users may configure up to two alarms that can be triggered at a wide variety of possible times. Note: The Pmod RTCC is also...
₹ 1,439.00 *
Pmod GYRO: 3-axis Digital Gyroscope The Pmod GYRO is a 3-axis gyroscope powered by the STMicroelectronics L3G4200D . By communicating with the chip through SPI or I 2 C, users may configure the module to report angular momentum at a resolution of up to 2000 dps at an...
₹ 1,919.00 *
Pmod USBUART: USB to UART Interface The Pmod USBUART provides a USB to UART cross-conversion through the FTDI FT232R . Users may send data in either direction on the Pmod and receive the converted data in the appropriate format. Note: There are two UART signal pin...
₹ 1,439.00 *
Pmod RF2: IEEE 802.15 RF Transceiver The Pmod RF2 adds RF communication through the Microchip ® MRF24J40 IEEE 802.15.4™ 2.4GHz RF transceiver module. By communicating with the device through SPI, users can transmit data at speeds up to 625 kbps through the ZigBee ® , MiWi™,...
₹ 1,639.00 *
Pmod Clip Pmod ISNS20 20A Pmod DA4 Eight Pmod GYRO Pmod SSD Pmod NIC100 Pmod TMP2 Pmod CON3 R C Pmod RS485 Pmod AMP2 Audio Pmod MTDS 18 Pmod Cable Pmod SF3 32 MB Pmod PS2 Pmod CLS Digilent PCB Pmod HAT Pmod RTCC Pmod ACL2 Pmod VGA Video 2x6-pin to Dual Pmod SD 2x6 Pin Pmod Pmod STEP Pmod BTN 4 User Pmod ALS Pmod Cable Kit Pmod HB5 Pmod MIC3 MEMS Pmod AD5 Pmod HYGRO Pmod GPS GPS Pmod BLE Pmod PMON1 Pmod LS1 Pmod TPH 6-pin Pmod TPH2 Pmod I2S2 Pmod DA3 One Pmod MicroSD Pmod KYPD Pmod IOXP I O Pmod NAV 9-axis Pmod R2R Pmod AD1 Two 6 Pmod Cable
Viewed