Top seller
No results were found for the filter!
Pmod WiFi: WiFi Interface 802.11g
The Pmod WiFi provides Wi-Fi access through the Microchip ® MRF24WG0MA Wi-Fi ™ radio transceiver module. Users can communicate with the IEEE 802.11g compliant chip through SPI and achieve data rates up to 54 Mbps. Features: IEEE...
₹ 2,699.00 *
Pmod TPH2: 12-pin Test Point Header
The Pmod TPH2 offers 12 external pin headers so that users can easily test the GPIO signals passing through each of the pins. Features: 12 external test point headers Easily access and test signals passing through Small PCB size for...
₹ 559.00 *
Pmod OD1: Open Drain Output
The Pmod OD1 is an open drain FET module using NTHD4508 transistors. Users can then drive high current devices (up to 4.1A) by providing digital logic signals from the host board. Features: Two dual power N-FETs Comfortable drives 3.0 A...
₹ 769.00 *
Pmod SD: Full-sized SD Card Slot
The Pmod SD provides a full sized SD card slot that can be accessed through SPI. Features: Full size SD card slot Store and access large amounts of date from your system board No limitation on file system or memory size of SD card used...
₹ 1,249.00 *
Pmod HB5: H-bridge Driver with Feedback Inputs
The Pmod HB5 offers a 2A H-bridge circuit to drive small to medium sized DC motors. Two sensor feedback pins are incorporated into the motor connection header and are specifically designed to work with the Digilent motor/gearbox, which...
₹ 1,539.00 *
Pmod LS1: Infrared Light Detector
The Digilent Pmod LS1 allows users to receive signals from multiple optical sensors, such as the popular combination of an IR LED with an IR sensor used in line-following robots. Features: Infrared light detector with on-board...
₹ 1,249.00 *
Pmod HB3: H-bridge Driver with Feedback Inputs
The Pmod HB3 is a 2A H-Bridge module. This module includes a separate pin header in addition to the standard 6-pin header to receive any external motor feedback signals. The H-Bridge can be driven through GPIO signals. Features: 2A...
₹ 959.00 *
Pmod RS232: Serial Converter and Interface...
The Digilent Pmod RS232 converts between digital logic voltage levels to RS232 voltage levels using the Maxim Integrated MAX3232 transceiver . The RS232 module is configured as a data communications equipment (DCE) device. It connects to...
₹ 1,679.00 *
Pmod OC1: Open Collector Output
The Pmod OC1 is an open collector BJT module using MMBT3904 transistors. Users can then drive high current devices (up to 200 mA) by providing logic signals from the host board. Features: Four 100mA (200mA max) MMBT3904 transistors Four...
₹ 1,249.00 *
6-pin MTE Cable
Features: Provides the option to separate 6 signals using MTE connectors 6-pin connectors are standard 100mil spaced 25mil square connectors Can be used with any Digilent board Ideal for testing and verification
₹ 779.00 *
SMA to Alligator Clip Cable
An SMA to Alligator Clip Cable for a clean signal connection. Do you find yourself wishing that your signals were crisp, clean, and unimpeded unlike what you receive out of breadboard wires? Or perhaps do you find yourself called to a...
₹ 1,599.00 *
UART Crossover Cable
Features: 6", 6-pin crossover cable Connects newer UART-interface Pmods (PmodBT) to older microcontroller boards (Cerebot 2, Cerebot 32MX4, etc.) Connects older UART-interface Pmods (PmodCLS, PmodRS232, etc.) to newer microcontroller...
₹ 559.00 *
Digilent PCB 6 Pmod Cable Pmod KYPD Pmod AD1 Two Pmod PMON1 Pmod VGA Video Pmod DIP DIP to Pmod HYGRO Pmod OC1 Open Pmod SF3 32 MB Pmod SD Pmod COLOR Pmod NIC100 Pmod MAXSONAR Pmod RS485 Pmod MTDS Pmod DA4 Eight Pmod TPH 6-pin Pmod GPS GPS Pmod DA2 Two Pmod TPH2 Pmod MicroSD Pmod IOXP I O Pmod HB5 Pmod ACL2 Pmod CON3 R C Pmod ESP32 Pmod ALS Pmod AQS Pmod RTCC Pmod HB3 Pmod PS2 Pmod STEP Pmod BTN 4 User Pmod MIC3 MEMS 2x6 Pin Pmod Pmod Clip Pmod I2S2 Pmod DPOT Pmod RS232 18 Pmod Cable Pmod NAV 9-axis Pmod DA3 One Pmod HAT Pmod GYRO Pmod SSD
Viewed